We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB 3.0 Type A to Micro B cable with screw-on Micro B connector, 1.2m length

LORDWORLD

LORDWORLD USB 3.0 Type A to Micro B Cable with Mount Screws 1.2M

SKU CH-97ZJ-5DR3D

A 1.2 m USB 3.0 Type A to Micro B cable with removable M2 mounting screws for secure panel attachment, delivering up to 4.8 Gbps throughput and backward compatibility with USB 2.0 and 1.1

  • Up to 4.8 Gbps throughput with USB 3.0 host and device
  • 10× faster than USB 2.0 480 Mbps limit
  • Works with existing USB 2.0 1.1 ports
  • Removable M2 mount screws secure the Micro B connector
  • 2 m length fits industrial cameras, hard disks and phones

Industrial USB 3.0 Cable with Locking Screws

This cable connects a USB 3.0 Type A host to Micro B devices while providing mechanical retention via two M2 panel screws on the device end. It targets engineers and technicians who need a secure link for industrial cameras, external hard disks or other Micro B equipment that cannot tolerate accidental disconnection.

Removable Screws Enable Panel Mounting

The M2 screws on the Micro B plug can be fastened into a chassis cut-out, turning the connector into a fixed bulkhead interface. When panel mounting is not required the screws unscrew cleanly, leaving a standard cable for bench use. This dual-purpose design removes the need to stock separate fixed and loose cables.

Plug-and-Play with Backward Compatibility

The assembly requires no drivers; it operates at up to 4.8 Gbps with USB 3.0 hosts and falls back to USB 2.0 or 1.1 speeds on older ports. Installation fails only when the panel cut-out does not match the M2 spacing or when a connected device draws more bus power than the host port can supply.

Highlights

  • Up to 4.8 Gbps throughput with USB 3.0 host and device
  • 10× faster than USB 2.0 480 Mbps limit
  • Works with existing USB 2.0 1.1 ports
  • Removable M2 mount screws secure the Micro B connector
  • 2 m length fits industrial cameras, hard disks and phones

Specifications

BrandLORDWORLD

Questions about this item

Will the M2 mount screws on the Micro B end need periodic tightening or replacement?

The M2 mount screws on the Micro B end are removable and designed for secure panel mounting; they typically do not require periodic tightening unless the installation is subject to frequent vibration or movement.

What is the maximum data transfer rate this cable can sustain during continuous operation?

The cable supports up to 4.8Gbps throughput when connected to a USB 3.0 host and device, which is the practical limit for sustained bulk transfers.

Does the cable generate noticeable heat when running at full 4.8Gbps speed all day?

As a passive copper cable compliant with USB 3.0, it does not generate significant heat during continuous high-speed data transfer under normal conditions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.