We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LORDWORLD USB 3.0 male to USB 3.1 front panel header cable, 50cm

LORDWORLD

LORDWORLD USB 3.0 to USB 3.1 Type E Front Panel Header Extension Cable 50cm

SKU CH-V2V0-CV07B

Extends a motherboard USB 3.1 front-panel header to a USB 3.0 Type-A port over 50 cm, supporting up to 10 Gbps

  • Transfers data at up to 10 Gbps for fast file moves
  • 50 cm length reaches front-panel headers in most cases
  • USB 3.1 header connects to modern motherboards
  • USB 3.0 Type-A plug fits existing front-panel ports
  • 64 ft cable keeps internal routing tidy

Front-Panel USB 3.1 Header Adapter

This cable connects a motherboard USB 3.1 front-panel header to a standard USB 3.0 Type-A plug. It lets cases with older front-panel ports work with newer header pin-outs. The 50 cm length suits typical mid-tower chassis routing.

Extends Reach Without Speed Loss

The extension supports data rates up to 10 Gbps across the link. Builders can reposition front-panel ports or add a Type-A breakout without throttling bandwidth. No active electronics are required for the connection.

Simple Plug-and-Play Build

Both ends use moulded connectors keyed for correct insertion. The slim cable jacket bends easily behind drive cages and motherboard trays. No drivers, power adapters or firmware updates are needed for operation.

Highlights

  • Transfers data at up to 10 Gbps for fast file moves
  • 50 cm length reaches front-panel headers in most cases
  • USB 3.1 header connects to modern motherboards
  • USB 3.0 Type-A plug fits existing front-panel ports
  • 64 ft cable keeps internal routing tidy

Specifications

BrandLORDWORLD

Questions about this item

Will the USB 3.1 front panel header connector need replacement after repeated insertions?

The header connector is rated for standard motherboard insertion cycles; no user-serviceable parts or scheduled replacement are required.

What limits the 10Gbps data rate during sustained file transfers?

The 50cm cable length and USB 3.1 Gen 2 signalling cap the link at 10Gbps; real-world throughput depends on the host controller and attached drive.

Does the cable generate noticeable heat when running at 10Gbps all day?

Passive copper construction produces negligible heat under continuous 10Gbps loads; no active cooling is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.