We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular adapter with SFF-8482 connector and USB 3.0 port

LORDWORLD

LORDWORLD USB 3.0 to SAS Adapter SFF-8482 2.5/3.5" No PSU

SKU CH-W7MV-CVJ34

Connects 2.5" or 3.5" SFF-8482 SAS drives to USB 3.0, requires a separate 12V 3A 5.5×2.1 mm power supply, and works with Windows 7, 10, 11 and Linux

  • Connect SAS drives via USB without a RAID card
  • Works with Windows 7, 10, 11 and Linux systems
  • Built-in chip enables direct SAS-to-USB conversion
  • Requires separate 12V/3A DC 5.5*2.1mm power supply
  • Supports SFF-8482 drives only, not SFF-8639 U.2

USB 3.0 to SAS Adapter for 2.5/3.5" Drives

This LORDWORLD adapter connects SFF-8482 SAS hard disks to a standard USB 3.0 port on any computer. It is designed for users who need to access enterprise SAS storage without a dedicated RAID card or SAS host bus adapter. The device requires a separate 12V/3A DC 5.5*2.1mm power supply to operate.

USB 3.0 bandwidth and SMART limitations

The adapter uses the USB 3.0 interface, so maximum transfer speed is limited by that bus rather than the native SAS link. SMART data from the SAS disk will display incomplete or no information after conversion, although normal reading and writing are unaffected. Only SFF-8482 SAS drives are supported; SFF-8639 U.2 drives will not work with this adapter.

Replaces a SAS RAID card for direct USB access

This adapter removes the need for an internal SAS RAID card or HBA when you only need to read or write a few SAS drives externally. The jump is worth it for data recovery, drive testing or archiving tasks where installing a full controller is impractical. It is not for users who require full SMART monitoring, multi-drive arrays or native SAS performance.

Highlights

  • Connect SAS drives via USB without a RAID card
  • Works with Windows 7, 10, 11 and Linux systems
  • Built-in chip enables direct SAS-to-USB conversion
  • Requires separate 12V/3A DC 5.5*2.1mm power supply
  • Supports SFF-8482 drives only, not SFF-8639 U.2

Specifications

BrandLORDWORLD

Questions about this item

Should I choose the 2.5" or 3.5" version for my SAS drive?

This single adapter works with both 2.5" and 3.5" SFF-8482 SAS hard disks, so you do not need to pick a separate version.

What transfer speed will I actually see when the adapter is connected to a USB 3.0 port?

The adapter uses a USB 3.0 interface, so real-world throughput is limited by the USB 3.0 bus rather than the native SAS link speed.

Does the SFF-8482 connector on this adapter also support SFF-8639 U.2 drives?

No, the adapter only supports SFF-8482 SAS hard disks; SFF-8639 U.2 drives are explicitly not supported.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.