We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vertical bare circuit board dock with Type-C and Type-A cables attached

LORDWORLD

LORDWORLD USB 3.0 Multi-Interface SSD Docking Gadget

SKU CH-85VT-5EBKM

Connects M.2 NVME and SATA drives up to 10 Gbps via USB 3.0 Type-C, supporting 2242/2260/2280 sizes plus 2.5 and 3.5 inch SATA with 12 V power

  • Connect M.2 NVMe SSDs at up to 10Gbps via USB-C
  • Read 2.5 and 3.5 inch SATA drives at 5Gbps over USB 3.0
  • Supports M-Key and B+M M.2 sizes 2242 2260 2280
  • Works with one drive at a time; SATA takes priority if both connected
  • Includes Type-C and Type-A cables for broad host compatibility

Multi-Interface SSD Docking Gadget

The LORDWORLD USB 3.0 docking gadget connects M.2 NVME drives in 2242, 2260 and 2280 sizes alongside 2.5-inch and 3.5-inch SATA drives plus 40-pin IDE devices. It is built for technicians and hobbyists who need to access data from mixed drive types through a single USB-C or USB-A link. Only one drive operates at a time.

Vertical PCBA Enclosure with Attached Cables

The vertical PCBA layout keeps connectors exposed while fixed Type-C and Type-A cables remove the need for separate leads. A 12 V DC input powers 3.5-inch SATA drives; the supply is not included. Drives do not support hot swapping, so the host must be disconnected before changing media. SATA priority takes over if M.2 and SATA are both seated.

Upgrades Legacy IDE and SATA Access

The dock replaces separate IDE, SATA and M.2 adapters by consolidating them into one USB 3.0 device. M.2 NVME reaches 10 Gbps on USB-C Gen 2 links while SATA tops out at 5 Gbps. The jump is worth it when a workflow regularly switches between NVME, SATA and older 40-pin drives without needing simultaneous operation.

Highlights

  • Connect M.2 NVMe SSDs at up to 10Gbps via USB-C
  • Read 2.5 and 3.5 inch SATA drives at 5Gbps over USB 3.0
  • Supports M-Key and B+M M.2 sizes 2242 2260 2280
  • Works with one drive at a time; SATA takes priority if both connected
  • Includes Type-C and Type-A cables for broad host compatibility

Specifications

BrandLORDWORLD

Questions about this item

What practical speed does the USB 3.0 interface cap at for an NVMe drive?

The USB 3.0 link limits an NVMe drive to 5 Gbps even though the dock can pass 10 Gbps over a USB-C Gen 2 connection.

What drive sizes and power does the dock need to fit a 3.5-inch desktop drive?

It accepts 3.5-inch SATA drives and requires an external 12 V DC power supply that is not included.

How do you install a drive without triggering the single-drive rule?

Connect only one drive — M.2 or SATA/IDE — before plugging the dock into the computer; never swap drives while the dock is powered.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.