We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD USB 3.0 20Pin 19Pin 90° Down & Up Angled Adapter

SKU CH-WBEM-TW8FP

USB 3.0 20-pin and 19-pin adapter with 90-degree up and down angled connectors for tight motherboard spaces

  • Super-speed 5Gbps transfer, ten times faster than USB 2.0
  • Down and up 90-degree angled adapters fit tight motherboard spaces
  • Two-way data transmission works simultaneously in both directions
  • Compatible with 19-pin and 20-pin USB 3.0 motherboard headers
  • Angled design connects easily even when surrounding clearance is limited

USB 3.0 angled adapter for tight motherboard headers

This LORDWORLD adapter converts a 20-pin or 19-pin USB 3.0 motherboard header to a female port with a 90-degree bend. Both down-angled and up-angled variants are included so the builder can route the cable in the direction that fits the case interior. It is intended for system integrators and DIY builders who need front-panel USB 3.0 connectivity where a straight connector would foul adjacent components or the side panel.

Passive design adds no heat or noise

The adapter contains no active circuitry, so it draws no additional power and generates no audible noise. Thermals are entirely dictated by the host controller and connected devices. Because it simply reroutes the existing differential pairs, power consumption remains identical to a direct header connection.

Signal integrity maintained under continuous

The short trace length and shielded construction preserve the 5 Gbps SuperSpeed rating during sustained file transfers or device streams. Two-way simultaneous transmission is supported without degradation, so the link behaves like a straight header even when the bus is saturated for long periods. Builders who need right-angle routing for multiple stacked headers or extremely cramped ITX layouts should verify pin orientation before ordering.

Highlights

  • Super-speed 5Gbps transfer, ten times faster than USB 2.0
  • Down and up 90-degree angled adapters fit tight motherboard spaces
  • Two-way data transmission works simultaneously in both directions
  • Compatible with 19-pin and 20-pin USB 3.0 motherboard headers
  • Angled design connects easily even when surrounding clearance is limited

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 90° angled adapter onto a 20-pin motherboard header without forcing the connector?

Align the 19-pin plug with the keyed 20-pin header, press straight down until the latch clicks, then route the cable along the board edge so the right-angle bend clears adjacent components.

Will the gold-plated contacts on the USB 3.0 adapter need cleaning or replacement over time?

The contacts are rated for thousands of mating cycles; occasional compressed-air dusting is sufficient and no scheduled replacement is required.

At what point does sustained 5 Gbps throughput hit a thermal or signal-integrity limit?

The adapter is passive and carries the full 5 Gbps specification continuously; the first limit encountered will be the host controller or cable length, not the adapter itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.