We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two USB-C female latch-mount sockets with short 2-pin pigtail wires

LORDWORLD

LORDWORLD USB 2.0 Type-C Female Latch Mount to 2-Pin Pigtail Cable 10cm 2pcs

SKU CH-T2Q6-34E1A

Two USB 2.0 Type-C latch-mount sockets with 10 cm two-pin pigtails for soldering power-only connections

  • Delivers up to 2A charging at 5V via USB 2.0 Type-C
  • 10 cm pigtail with 2-pin open ends ready for soldering
  • Latch-mount socket secures the USB-C port to a panel or enclosure
  • Two cables included for DIY or OEM repair projects
  • Power-only connection — no data lines or PD support

DIY USB-C Power Cable Kit

This two-piece set provides a latch-mount USB Type-C female socket with a 10cm two-pin pigtail for custom wiring. It is intended for hobbyists and repair technicians who need to add a USB-C power input to an enclosure or replace a damaged port. The cables arrive unterminated so each connection must be soldered by the installer.

5V 2A Power Delivery Limit

The assembly passes up to DC 5V at 2A when paired with a USB 2.0 Type-C source and device. Only the two power pins are connected so the cable cannot negotiate Power Delivery profiles or carry any data signals. Builders requiring higher voltages, data lines or PD communication will need a different harness.

Passive Operation With No Active Cooling

The short pigtail and latch-mount socket draw no power themselves and generate no measurable heat during normal use. There are no fans, controllers or active components to produce noise or increase system power draw. Thermal performance is therefore dictated entirely by the host supply and the load attached.

Highlights

  • Delivers up to 2A charging at 5V via USB 2.0 Type-C
  • 10 cm pigtail with 2-pin open ends ready for soldering
  • Latch-mount socket secures the USB-C port to a panel or enclosure
  • Two cables included for DIY or OEM repair projects
  • Power-only connection — no data lines or PD support

Specifications

BrandLORDWORLD

Questions about this item

Will the 10 cm pigtail reach the header on an older motherboard without stretching?

The pigtail is 10 cm long including the connector; measure your board’s header position to confirm reach before soldering.

How can I verify the cable is passing the rated 5 V 2 A after I solder it?

Use a USB power meter or multimeter on the Type-C female latch mount while a load is drawing current to confirm 5 V up to 2 A.

The pack lists two cables — do I need to buy any connectors or solder separately?

The pack contains two 10 cm Type-C female latch-mount to 2-pin pigtail cables; you must supply your own solder and any additional connectors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.