We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact USB 2.0 enclosure for 1.8 inch Micro SATA 16-pin 7+9 drives

LORDWORLD

LORDWORLD USB 2.0 to 1.8" Micro SATA 16-pin 7+9 gender changer

SKU CH-FGYB-381Y5

Connects a 1.8 inch Micro SATA 16-pin 7+9 drive via USB 2.0 at 480Mbps, also compatible with USB 3.0 ports, for SSDs or hybrid drives up to 5mm thick

  • Connect 1.8 inch Micro SATA drives via USB 2.0
  • Achieve 480 Mbps transfer speeds with USB 2.0
  • Works with USB 3.0 and USB 2.0 ports
  • Supports 16-pin 7+9 Micro SATA connector
  • Fits SSDs and hybrid drives up to 5 mm thick

Micro SATA 1.8" enclosure for thin drives

This enclosure connects a 1.8 inch Micro SATA SSD or hybrid drive to a computer through a USB 2.0 link. It accepts the 16-pin 7+9 connector found on drives no thicker than 5 mm. The bridge operates at USB 2.0 480 Mbps and is backward compatible with USB 3.0 ports. It is aimed at users recovering data from legacy ultraportable or embedded storage.

Tool-free shell with standard USB plug

The housing slides together without screws so the drive can be swapped in seconds. A fixed USB 2.0 cable ends in a regular Type-A plug that fits any USB 2.0 or 3.0 port without an extra adapter. The Micro SATA 7+9 receptacle inside is keyed to prevent mis-insertion. No external power brick is required because the bus supplies enough current for the supported drives.

Replaces a missing internal Micro SATA port

The adapter lets a modern laptop or desktop read and write 1.8 inch Micro SATA media that the machine no longer accommodates internally. It does not work with mSATA or full-size SATA drives so owners of those formats need a different solution. The 480 Mbps ceiling makes it practical for document archives or OS images but slow for large media libraries.

Highlights

  • Connect 1.8 inch Micro SATA drives via USB 2.0
  • Achieve 480 Mbps transfer speeds with USB 2.0
  • Works with USB 3.0 and USB 2.0 ports
  • Supports 16-pin 7+9 Micro SATA connector
  • Fits SSDs and hybrid drives up to 5 mm thick

Specifications

BrandLORDWORLD

Questions about this item

What USB standard does the LORDWORLD adapter use and what is the maximum transfer rate?

The adapter operates at USB 2.0 480Mbps mode and is compatible with both USB 3.0 and USB 2.0 host ports.

Which drive form factor and connector does the enclosure accept, and what is the thickness limit?

It fits any 1.8 inch Micro SATA SSD or hybrid drive with a 16-pin 7+9 connector, provided the drive thickness does not exceed 5mm.

How is the drive installed in the enclosure and what common mistake should be avoided?

Insert the Micro SATA drive into the 16-pin 7+9 socket inside the case, secure the cover, then connect the USB cable; do not attempt to use mSATA or standard SATA drives as they are not supported.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.