We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD USB 2.0/3.0 Front Panel to Rear Bracket Cable 0.5m 12cm

SKU CH-6MHV-N8G4N

Converts a motherboard 9/10-pin and 19/20-pin header into two USB 2.0 and two USB 3.0 rear ports using a 50 cm cable with a 12 cm PCI-E bracket

  • Adds four rear USB ports via motherboard 9/10-pin and 19/20-pin headers
  • USB 3.0 Super-Speed at 5Gbps plus USB 2.0 Hi-Speed at 480Mbps
  • 50cm cable with 12cm PCI-E bracket fits standard chassis slots
  • Single-piece moulded construction built for long-term durability
  • Supports keyboard, mouse, drives, printer, hub, SSD and camera devices

Front-panel USB extension for rear access

This LORDWORLD adapter converts a motherboard 9-pin USB 2.0 header and a 19-pin USB 3.0 header into two USB 2.0 and two USB 3.0 ports on a standard PCI-E bracket. The .5 m cable routes from the internal headers to the rear of the chassis. It supports USB 3.0 at 5 Gbps and USB 2.0 at 480 Mbps.

Suits builds that lack rear USB ports

Builders who need extra rear connections for keyboards, mice, flash drives, external drives, printers, hubs, SSDs or cameras will find this bracket useful. It is not for systems without a spare 9-pin and 19-pin front-panel header, nor for users who only need internal front-panel ports.

Check header availability and bracket clearance

Verify that your motherboard provides both a 9-pin USB 2.0 header and a 19-pin USB 3.0 header. Confirm the rear expansion slot spacing can accommodate the 12 cm bracket. Ensure the .5 m cable length reaches from the headers to the chosen slot without strain.

Highlights

  • Adds four rear USB ports via motherboard 9/10-pin and 19/20-pin headers
  • USB 3.0 Super-Speed at 5Gbps plus USB 2.0 Hi-Speed at 480Mbps
  • 50cm cable with 12cm PCI-E bracket fits standard chassis slots
  • Single-piece moulded construction built for long-term durability
  • Supports keyboard, mouse, drives, printer, hub, SSD and camera devices

Specifications

BrandLORDWORLD

Questions about this item

Does my motherboard need both a 9-pin USB 2.0 header and a 19-pin USB 3.0 header to use all four ports?

Yes, the cable splits into a 9/10-pin plug for two USB 2.0 ports and a 19/20-pin plug for two USB 3.0 ports, so both headers must be present.

Will the USB 3.0 ports run at 5 Gbps on a motherboard that only has USB 2.0 headers?

No, the USB 3.0 female ports require a 19/20-pin USB 3.0 header to achieve 5 Gbps; plugging only the USB 2.0 header limits those ports to 480 Mbps.

How can I verify each port is running at its rated speed after installation?

In Device Manager, check that the two USB 3.0 ports appear under a USB 3.0 host controller and the two USB 2.0 ports under a USB 2.0 controller, then test with a USB 3.0 flash drive to confirm 5 Gbps operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.