We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare green PCB with USB-A male plug and three female ports USB-A USB-C Micro-USB

LORDWORLD

LORDWORLD USB 2.0 1-to-3 Power Splitter PCBA Board

SKU CH-0PXQ-W5GG1

A bare PCB board splits one USB 2.0 Type-A power input into three outputs — Type-A, Type-C and Micro-USB — delivering up to 5 V 2 A total for charging devices without data transfer

  • Powers three USB devices from one source
  • Total 5V 2A shared across all output ports
  • USB-A, USB-C and Micro-USB outputs included
  • Bare PCBA board — no enclosure or cables supplied
  • Power-only splitter with no data transfer capability

USB 2.0 power splitter board

This LORDWORLD PCBA board splits one USB-A male power input into three female outputs: USB-A, USB-C and Micro-USB. It delivers power only and does not transfer data, making it suitable for charging phones or powering small USB devices in a home or office setting.

Solder-ready bare PCB installation

The module arrives as an exposed circuit board without a case or cables, so you must solder or otherwise connect wires to the pitch pads yourself. Because there is no controller chip, the board cannot negotiate power or act as a data hub, and all three ports share a single 5 V 2 A limit.

Check power source and device needs

Verify that your USB-A host can supply up to 2 A at 5 V and that the combined draw of the connected devices stays within that budget. The board is not for buyers who need data transfer, intelligent current negotiation or an enclosed, ready-to-use hub.

Highlights

  • Powers three USB devices from one source
  • Total 5V 2A shared across all output ports
  • USB-A, USB-C and Micro-USB outputs included
  • Bare PCBA board — no enclosure or cables supplied
  • Power-only splitter with no data transfer capability

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the board is delivering power correctly after connecting it?

Connect a USB power device to any output port and verify it receives 5 V at up to 2 A total across all three ports.

What comes in the package and what must I source separately?

Only the bare PCBA is included; you must provide your own enclosure and any cables needed for the USB-A, USB-C, Micro-USB or pitch outputs.

Which version should I choose for a simple three-port power splitter?

This single PCBA model provides one USB-A male input and three female outputs — USB-A, USB-C and Micro-USB — with a combined 5 V 2 A limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.