We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 hub cable with three Type-A ports and attached Type-C adapter

LORDWORLD

LORDWORLD USB 2.0 1-to-3 Hub 27cm Type-A/Type-C 480Mbps

SKU CH-7YHZ-6SS91

A compact USB 2.0 hub expands one Type-A or Type-C port into three Type-A sockets, delivering up to 480 Mbps data and simultaneous power over a 27 cm cable

  • Expands one port into three for simultaneous peripheral use
  • Supports both USB Type-A and Type-C hosts via included adapter
  • Delivers up to 480Mbps throughput with USB 2.0 devices
  • Tangle-free 27cm cable built for durable daily carry
  • Bus-powered design needs no external supply for connected devices

Compact USB 2.0 hub for peripheral expansion

The LORDWORLD hub turns one host port into three Type-A sockets, letting you connect a keyboard, mouse, printer or disk drive at the same time. It draws power directly from the host, so no external adapter is required. The 27 cm cable keeps the setup tidy on a desk or in a laptop bag. A bundled Type-A to Type-C adapter extends compatibility to USB-C OTG devices.

Bus-powered operation with 480 Mbps throughput

Because the hub is bus-powered, it adds no extra cables or wall plugs and runs silently. The USB 2.0 chipset is designed to limit signal loss across the extension, delivering up to 480 Mbps when both host and device support USB 2.0. Power and data lines operate simultaneously, so you can charge a phone while transferring files. The tangle-free jacket protects the cable during daily carry.

Included Type-C adapter widens device support

The supplied Type-A to Type-C adapter plugs onto the hub’s input, letting you use the same three ports with USB-C laptops, tablets or phones that support OTG. The reversible connector removes orientation hassle. No drivers or software are needed; the hub works immediately on any system with standard USB 2.0 support. It does not add ports beyond the three Type-A outputs.

Highlights

  • Expands one port into three for simultaneous peripheral use
  • Supports both USB Type-A and Type-C hosts via included adapter
  • Delivers up to 480Mbps throughput with USB 2.0 devices
  • Tangle-free 27cm cable built for durable daily carry
  • Bus-powered design needs no external supply for connected devices

Specifications

BrandLORDWORLD

Questions about this item

How do I install the LORDWORLD USB 2.0 1-to-3 Hub and what is the common mistake?

Plug the Type-A or Type-C male end into your host device, then connect up to three peripherals to the female ports. The common mistake is forgetting the attached Type-A to Type-C adapter when using a Type-C only host.

What maintenance or replacement will the LORDWORLD USB 2.0 1-to-3 Hub need later?

The tangle-free jacket protects the 27cm cable for long-term durability. No routine maintenance is required, but replace the hub if the connector pins bend or the cable sheath shows wear from frequent bending.

What limit appears first when using the LORDWORLD USB 2.0 1-to-3 Hub under sustained load?

The shared USB 2.0 bandwidth caps total throughput at 480Mbps across all three ports. Simultaneous high-speed transfers on multiple devices will hit this limit before any other constraint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.