We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black enclosure housing a U.2 SFF-8639 male to M.2 M-key adapter board

LORDWORLD

LORDWORLD U.2 SFF-8639 to M.2 M-Key Adapter with Black Case

SKU CH-NQPJ-Q89JF

Connects an M-key NVME M.2 SSD in 2230, 2242, 2260 or 2280 format to a U.2 SFF-8639 interface, with a black case enclosure

  • Adapts M.2 M-key NVMe SSDs to a U.2 SFF-8639 slot
  • Supports 2230, 2242, 2260 and 2280 form factors with 1.5 mm component clearance
  • Works with Intel SSD 750, p3600 and p3700 replacements
  • Requires a free U.2 SFF-8639 or SFF-8643 interface and M-key NVMe drive
  • Compatible with Windows 8, 8.1, 10 and Linux Kernel 3.16

What this adapter does

This LORDWORLD adapter lets you install an M.2 M-key NVME SSD into a system that only has a free U.2 SFF-8639 or SFF-8643 interface. The black case enclosure protects the drive while it sits internally on the 68-pin U.2 connector. It accepts M.2 modules in 2280, 2260, 2242 and 2230 lengths with a maximum component height of 1.5 mm. Double-sided populated modules are supported.

Who should use it and who should not

This suits builders replacing an Intel SSD 750 p3600 or p3700, or anyone adding NVME storage to a board with an available U.2 port. It will not work with B-key or B/M-key SSDs, and it cannot connect to a SATA port. Buyers who need SATA M.2 support or who lack a U.2 or SFF-8643 header should look at a different solution.

What to verify before ordering

Confirm your motherboard or backplane provides a free U.2 SFF-8639 68-pin interface or an SFF-8643 interface. Ensure the M.2 drive you plan to use is M-key NVME and fits one of the supported lengths. Check that components on the module do not exceed 1.5 mm in height. The host system must run Windows 8, 8.1, 10 or Linux Kernel 3.16 or newer.

Highlights

  • Adapts M.2 M-key NVMe SSDs to a U.2 SFF-8639 slot
  • Supports 2230, 2242, 2260 and 2280 form factors with 1.5 mm component clearance
  • Works with Intel SSD 750, p3600 and p3700 replacements
  • Requires a free U.2 SFF-8639 or SFF-8643 interface and M-key NVMe drive
  • Compatible with Windows 8, 8.1, 10 and Linux Kernel 3.16

Specifications

BrandLORDWORLD

Questions about this item

What SSD key type and lengths does the LORDWORLD adapter accept?

The adapter fits M-key NVMe SSDs in 2230, 2242, 2260 and 2280 lengths. B-key or B/M-key drives will not work. Maximum component height on the module is 1.5 mm and double-sided boards are supported.

My motherboard only has a SFF-8643 port — can I still use this adapter?

Yes. The product lists a free SFF-8643 interface as an alternative to the U.2 SFF-8639 connector, so the adapter can be connected through either interface.

How do I confirm the adapter is functioning after installation?

The drive should appear in the BIOS or OS disk manager under Windows 8, 8.1, 10 or Linux Kernel 3.16. If it is visible and passes a read/write test, the adapter is working as intended.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.