We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LORDWORLD U.2 SFF-8639 to E1.S carrier adapter with heatsink for 9.5 15 25mm SSDs

LORDWORLD

LORDWORLD U.2 SFF-8639 to E1.S Carrier Adapter 9.5mm 15mm 25mm

SKU CH-E0HZ-5NTTM

Converts E1.S SSDs to U.2 SFF-8639 for server and data-centre use, supporting 9.5mm, 15mm and 25mm drive thicknesses

  • Connect E1.S drives to U.2 bays via SFF-8639 PCI-E 4X interface
  • Supports 9.5mm, 15mm and 25mm thick SSDs with integrated heat sink
  • Compatible with PM9A3, PM9D3 and P5801X ruler SSDs
  • Enables EDSFF E1.S storage in IoT, data-centre and server deployments
  • Carrier adapter converts GEN-Z E1.S SSD to standard U.2 form factor

U.2 SFF-8639 to E1.S Carrier Adapter

This adapter converts an EDSFF E1.S SSD into a U.2 SFF-8639 drive for internal installation. It connects through a PCI-E 4X host interface and accepts 9.5mm, 15mm and 25mm thick SSDs with a heatsink. Suitable for IoT, data centre and server deployments. Compatible with drives such as PM9A3, PM9D3 and P5801X.

PCI-E 4X interface and form-factor limits

The adapter operates over a U.2 SFF-8639 PCI-E 4X connection, so bandwidth is bound to that link. Only E1.S ruler SSDs in the three supported thicknesses will fit the carrier. EDSFF form factors offer different capacity and thermal profiles, but this carrier is limited to the short E1.S size. No other drive lengths or connector types are supported.

Check your system before ordering

Verify that your motherboard or backplane provides a U.2 SFF-8639 PCI-E 4X port with enough physical clearance for the carrier. Confirm the SSD you plan to use is an E1.S model measuring 9.5mm, 15mm or 25mm thick with a heatsink attached. Ensure your chassis airflow can handle the converted drive in its mounting location.

Highlights

  • Connect E1.S drives to U.2 bays via SFF-8639 PCI-E 4X interface
  • Supports 9.5mm, 15mm and 25mm thick SSDs with integrated heat sink
  • Compatible with PM9A3, PM9D3 and P5801X ruler SSDs
  • Enables EDSFF E1.S storage in IoT, data-centre and server deployments
  • Carrier adapter converts GEN-Z E1.S SSD to standard U.2 form factor

Specifications

BrandLORDWORLD

Questions about this item

Which thickness option should I choose — 9.5mm, 15mm or 25mm?

Match the thickness to the E1.S SSD you are installing; the carrier accepts 9.5mm, 15mm and 25mm drives with their heatsinks already fitted.

What does the U.2 SFF-8639 PCI-E 4X interface mean for actual throughput?

The adapter presents the E1.S SSD to the host as a U.2 device over a four-lane PCIe link, so the SSD’s native speed is limited only by that x4 electrical connection.

Does the SFF-8639 connector cap the drive to a specific PCIe generation?

The SFF-8639 connector itself does not enforce a generation limit; the effective ceiling is set by the host backplane and the SSD’s own controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.