We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal cage holding eight U.2 NVMe trays with 80 mm fan

LORDWORLD

LORDWORLD ToughArmor MB508V5P-B 8-Bay 15 mm U.2/U.3 NVMe hard drive adapter

SKU CH-HDY2-40VCP

Holds eight 15 mm U.2/U.3 NVMe SSDs in two 5.25" bays with four MCIO 8i connectors, 80 mm fan and dual PCIe power inputs

  • Holds eight 15 mm U.2/U.3 NVMe SSDs in two 5.25" bays
  • Four MCIO 8i connectors deliver PCIe Gen5 x4 bandwidth per drive
  • 80 mm fan and optimised airflow keep Gen5 SSDs cool under load
  • Eagle-Hook tray locks prevent accidental drive ejection during operation
  • Full-metal ToughArmor build with dual PCIe power inputs for industrial reliability

8-bay NVMe mobile rack for dual 5.25 bays

The ToughArmor MB508V5P-B fits eight 15 mm U.2/U.3 NVMe SSDs into two standard 5.25 inch drive bays. Four MCIO 8i connectors provide PCIe Gen5 x4 bandwidth to each drive. A full-metal chassis and an 80 mm fan with directed airflow keep Gen5 thermals stable under sustained load.

Suits Tri-Mode HBA or RAID cards.

The cage operates in NVMe mode only and requires a controller that can present PCIe lanes over MCIO 8i cables. Power is supplied through one 8-pin and one 6-pin PCIe connector for reliable delivery to all eight drives. Builders without MCIO-capable host adapters cannot use this enclosure.

MCIO 8i (SFF-TA-1016) interface decides

Each of the four MCIO 8i ports carries four PCIe Gen5 lanes to a pair of drive trays, so the host card must expose the same pin-out and lane count. Eagle-Hook tray locks prevent accidental ejection during transport or vibration. The design also accepts 7 mm to 15 mm drive heights, covering current and upcoming form factors.

Highlights

  • Holds eight 15 mm U.2/U.3 NVMe SSDs in two 5.25" bays
  • Four MCIO 8i connectors deliver PCIe Gen5 x4 bandwidth per drive
  • 80 mm fan and optimised airflow keep Gen5 SSDs cool under load
  • Eagle-Hook tray locks prevent accidental drive ejection during operation
  • Full-metal ToughArmor build with dual PCIe power inputs for industrial reliability

Specifications

BrandLORDWORLD

Questions about this item

Do I need a motherboard or HBA with MCIO 8i ports to connect the 4 x SFF-TA-1016 cables?

Yes, you need a host adapter or motherboard that provides four MCIO 8i (SFF-TA-1016) connectors, each delivering PCIe Gen5 x4 per drive.

Will my existing 7 mm U.2 NVMe SSDs fit in the 15 mm trays?

The trays accept U.2/U.3 SSD heights from 7 mm to 15 mm, so 7 mm drives install securely with the Eagle-Hook lock.

How can I verify each NVMe SSD is running at Gen5 x4 after installation?

Check the operating system device manager or a tool such as NVMe CLI to confirm the link speed shows Gen5 x4 for all eight drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.