LORDWORLD
LORDWORLD SFF-8611 Oculink Female SFF-8612 to U.2 U.3 SFF-8639 NVME PCIe SSD Adapter
Converts an OCuLink SFF-8612 port to a U.2/U.3 SFF-8639 NVMe SSD slot with PCIe 4.0/5.0 support up to 64Gbps
- Up to 64Gbps throughput with NVME 1.2 support
- Carries PCIe 4.0 and 5.0 signals over NVME protocol
- Connects SFF-8612 Oculink female to SFF-8639 U.2/U.3 female plus SATA power
- Vertical connector fits tight spaces around female ports
- Adds one SFF-8612 Oculink interface to existing U.2/U.3 port
LORDWORLD OCuLink to U.2 U.3 Adapter
This adapter connects an OCuLink SFF-8612 female port to a U.2 or U.3 SFF-8639 NVMe SSD. It transmits PCI Express 4.0 and 5.0 signals using the NVMe 1.2 protocol for data rates up to 64Gbps. A SATA power connector supplies the drive. The vertical connector fits tight spaces around the motherboard port.
Suits builders adding U.2 U.3 storage via OCuLink
This unit is for systems with an available OCuLink SFF-8612 interface that need to attach a 2.5-inch U.2 or U.3 NVMe drive. It is not for users lacking an OCuLink host port or a SATA power connection. Builders requiring M.2 or direct PCIe slot installation should look at a different adapter type.
Vertical SFF-8612 female connector for tight
The right-angle SFF-8612 female header lets you plug the adapter into a motherboard port even when surrounding components leave little room. This physical layout is the deciding factor for builds where a straight connector would foul adjacent headers or heatsinks.
Highlights
- Up to 64Gbps throughput with NVME 1.2 support
- Carries PCIe 4.0 and 5.0 signals over NVME protocol
- Connects SFF-8612 Oculink female to SFF-8639 U.2/U.3 female plus SATA power
- Vertical connector fits tight spaces around female ports
- Adds one SFF-8612 Oculink interface to existing U.2/U.3 port
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What bandwidth ceiling does the 64 Gbps link impose on a sustained PCIe 5.0 NVMe workload?
The adapter passes PCIe 4.0 and 5.0 signals at up to 64 Gbps, so the link itself caps sustained throughput at that rate.
Does the SFF-8612 to SFF-8639 conversion add measurable heat or noise during all-day operation?
The board has no active cooling and draws power only through the SATA connector, so it adds negligible heat and no audible noise.
Which power connector must the host system already provide for the adapter to function?
A standard SATA power cable from the power supply is required to energise the adapter circuitry.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115819BTC
In stock
