We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black SATA male-to-female 90° up-angled adapter

LORDWORLD

LORDWORLD SATA Male to Female 90° UP Angled Adapter 2.5/3.5

SKU CH-RA1Q-82KWH

A 90-degree upward angled SATA adapter connects 2.5 or 3.5-inch drives in tight spaces while preserving 6Gbps data and power delivery

  • Keeps full 6Gbps speed while re-routing the SATA port
  • 90° upward angle fits drives in tight chassis spaces
  • Passes 5V and 12V power without signal loss
  • Works with both 2.5 and 3.5 inch SATA drives
  • Improves cable routing for cleaner internal airflow

Direction-changing SATA adapter

The LORDWORLD adapter reorients a SATA male-to-female connection by 90 degrees upward. It supports 2.5 and 3.5 inch hard disk drives without altering the interface definition or transmission speed. The device simply redirects the port to fit tight spaces.

Passive thermal and power profile

The adapter has no active cooling and generates no audible noise during operation. It passes 5V and 12V power lines alongside 6Gbps data without adding measurable resistance. Power draw remains that of the attached drive alone.

Compact build for cable routing

The moulded housing keeps the right-angle bend rigid so cables sit flush against the drive or motherboard. Gold-plated contacts resist oxidation through repeated insertions. Builders who need a downward or side-facing angle cannot use this fixed upward orientation.

Highlights

  • Keeps full 6Gbps speed while re-routing the SATA port
  • 90° upward angle fits drives in tight chassis spaces
  • Passes 5V and 12V power without signal loss
  • Works with both 2.5 and 3.5 inch SATA drives
  • Improves cable routing for cleaner internal airflow

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 90° UP angled SATA adapter without stressing the drive port?

Align the male end with the drive's SATA port, press straight in until the latch clicks, then route the female end upward; the right-angle body prevents the cable from bending sharply behind the drive.

Will the gold-plated contacts on this adapter need cleaning or replacement over time?

The contacts are passive metal; they do not degrade under normal use, so no cleaning or replacement is required unless physical damage or corrosion appears.

At what point does the 6Gbps data rate become the bottleneck during sustained transfers?

The adapter passes the full SATA 6Gbps specification; the first limit under sustained use will be the drive's own sequential speed or the host controller, not the adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.