We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black adapter with 29-pin SAS connector, USB 3.0 plug and 12V power port

LORDWORLD

LORDWORLD SAS SFF-8482 29Pin to USB 3.0 5Gbps RAID Adapter with 12V 3A Power Supply

SKU CH-MEK8-F7TEA

Connects a 29-pin SFF-8482 SAS drive to USB 3.0 at up to 5 Gbps with included 12 V 3 A power

  • Read and write SAS drives via USB without a RAID card
  • Up to 5Gbps throughput with USB 3.0 host and device
  • Supports SAS and SATA at 6.0, 3.0 and 1.5Gbps
  • Works with Windows 7, 10, 11 and Linux
  • Includes 12V 3A power supply for stable operation

SFF-8482 29-pin SAS to USB 3.0 adapter

This adapter connects a single SFF-8482 SAS hard disk to a standard USB 3.0 port on any computer. It targets users who need to access enterprise SAS drives without installing a dedicated RAID card. The built-in bridge chip handles protocol conversion so the drive appears as a normal USB storage device. A 12 V 3 A power supply is included to spin up the drive.

Upgrade from internal SAS controller or dock

The device replaces a full-height SAS HBA or a proprietary drive dock when only one SFF-8482 disk must be read or written. It supports SAS and SATA signalling at 6.0, 3.0 and 1.5 Gbps, while the USB 3.0 link delivers up to 5 Gbps throughput. The jump is worth it for occasional data recovery, forensic imaging or archiving tasks where a permanent controller is not justified.

Check drive connector and host port before ordering

Only drives with the 29-pin SFF-8482 connector are supported; SFF-8639 U.2 drives will not fit or function. The host system must provide a USB 3.0 type-A port to reach the stated 5 Gbps rate, though USB 2.0 will work at reduced speed. Compatible operating systems include Windows 7, 10, 11 and Linux.

Highlights

  • Read and write SAS drives via USB without a RAID card
  • Up to 5Gbps throughput with USB 3.0 host and device
  • Supports SAS and SATA at 6.0, 3.0 and 1.5Gbps
  • Works with Windows 7, 10, 11 and Linux
  • Includes 12V 3A power supply for stable operation

Specifications

BrandLORDWORLD

Questions about this item

Does the 29-pin SFF-8482 connector require a separate SAS backplane to mount the drive?

No, the adapter plugs directly into the SFF-8482 SAS hard disk; the drive can sit on any flat surface while the USB cable connects to the host computer.

Which step is most often missed when installing this adapter on Windows 10 or 11?

Connect the included 12V 3A power supply to the adapter before plugging the USB 3.0 cable into the computer, otherwise the drive will not spin up.

What part of this adapter is most likely to need replacement after extended use?

The 12V 3A power supply is the only external component that can wear out; the adapter itself has no moving parts or user-serviceable items.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.