We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LORDWORLD adapter with SFF-8482 29Pin and SATA 22Pin connectors

LORDWORLD

LORDWORLD SAS SFF-8482 29Pin to SATA 22Pin Adapter

SKU CH-NPM6-95SWM

Connects a SAS HDD with an SFF-8482 29-pin port to a SAS-compatible SATA controller using a 22-pin connector

  • Connects SAS drives with SFF-8482 ports to compatible controllers
  • Supports SATA drives when motherboard uses AHCI or RAID mode
  • Works with hybrid controllers that handle both SAS and SATA
  • Separates data and power for direct SATA or SAS connections
  • Requires SAS-capable motherboard or SATA-mode SAS drive to function

SAS-to-SATA adapter purpose

This adapter connects a SAS hard drive with an SFF-8482 29Pin interface to a SAS-capable SATA controller or hybrid controller. It is intended for system builders who already have a motherboard or add-in card that natively supports the SAS protocol and need to attach a 22Pin SATA or SAS drive. The product does not enable SAS drives on standard SATA-only ports.

Thermals noise and power

The adapter is a passive connector with no active electronics, so it adds no heat, noise or measurable power draw to the system. Thermal performance depends entirely on the drive and controller used. No external power input is required beyond the standard drive power cable.

Build quality and connectors

The moulded housing carries a 29Pin SFF-8482 male plug on one side and a 22Pin SATA female receptacle on the other, allowing direct attachment to compatible controllers and drives. Pin alignment follows the SAS specification, so the adapter fits only in correctly keyed ports. Users must verify that their controller or drive meets the SAS or SATA-mode requirement before installation.

Highlights

  • Connects SAS drives with SFF-8482 ports to compatible controllers
  • Supports SATA drives when motherboard uses AHCI or RAID mode
  • Works with hybrid controllers that handle both SAS and SATA
  • Separates data and power for direct SATA or SAS connections
  • Requires SAS-capable motherboard or SATA-mode SAS drive to function

Specifications

BrandLORDWORLD

Questions about this item

How do I install the SFF-8482 29Pin to SATA 22Pin adapter on a motherboard with a SAS chip?

Connect the SAS HDD's SFF-8482 data and power cables to the adapter, then plug the adapter into the motherboard's SAS SFF-8482 port and attach the power cord directly.

What maintenance or replacement will this passive adapter need later?

The adapter has no moving parts or electronics, so it requires no scheduled maintenance; replace it only if the 29Pin or 22Pin connectors become physically damaged.

What is the first limit I will hit when running a SAS HDD through this adapter continuously?

The adapter is a passive converter, so sustained throughput is limited by the SAS HDD and the motherboard's SAS-compatible SATA controller, not by the adapter itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.