We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with a 29-pin SAS connector and a 22-pin SATA connector side by side

LORDWORLD

LORDWORLD SAS 29Pin to 7+15 22Pin SATA Raid Adapter Card with Chipset

SKU CH-Z197-FN8MH

Converts an SFF-8482 SAS drive to a standard SATA 22-pin connection with a built-in chip, enabling 6.0, 3.0 and 1.5 Gbps speeds on Windows or Linux without a RAID card

  • Use SAS drives on standard SATA motherboards without a RAID card
  • Supports 6.0, 3.0 and 1.5 Gbps transmission rates
  • Works with Windows 7, 10, 11 and Linux operating systems
  • Built-in chip converts SFF-8482 SAS to 22-pin SATA interface
  • Not compatible with U.2 drives or USB enclosures

SAS 29Pin to SATA Adapter with Chipset

This adapter converts an SFF-8482 SAS hard disk to a standard SATA 7+15 22Pin interface using a built-in chip. It allows a motherboard with a regular SATA port to read and write SAS drives without a dedicated RAID card. Supported transmission rates are 6.0Gbps, 3.0Gbps and 1.5Gbps. Compatible with Windows 7, 10, 11 and Linux operating systems.

Compatibility Check Before Ordering

Verify that your drive uses the SFF-8482 connector; SFF-8639 U.2 drives are not supported. Ensure your motherboard provides a standard SATA data and power connection for the adapter. Do not plan to use this adapter with USB enclosures or cables, as the USB chipset may cause incompatibility. The SAS drive SMART data may display incompletely after conversion.

Build Integration and Benefits

The adapter plugs directly into a SATA data port and power connector on the motherboard, requiring no extra SAS controller card. It frees up a PCIe slot that a hardware RAID card would otherwise occupy. The unit draws power from the SATA connection to operate the conversion chip. It enables the use of enterprise SAS storage on consumer or workstation platforms lacking native SAS support.

Highlights

  • Use SAS drives on standard SATA motherboards without a RAID card
  • Supports 6.0, 3.0 and 1.5 Gbps transmission rates
  • Works with Windows 7, 10, 11 and Linux operating systems
  • Built-in chip converts SFF-8482 SAS to 22-pin SATA interface
  • Not compatible with U.2 drives or USB enclosures

Specifications

BrandLORDWORLD

Questions about this item

Does the package include any cables or do I need to buy SATA data and power cables separately?

The adapter card itself is supplied; SATA data and power cables are not included and must be purchased separately.

Which drive connector does this adapter accept — SFF-8482 or SFF-8639?

It accepts only SFF-8482 SAS hard disks; SFF-8639 U.2 drives are not supported.

What transfer speeds can I expect when a 6.0 Gbps SAS drive is connected through this adapter to a SATA motherboard port?

The adapter supports 6.0 Gbps, 3.0 Gbps and 1.5 Gbps signalling, so a 6.0 Gbps SAS drive will run at up to 6.0 Gbps on a compatible SATA port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.