LORDWORLD
LORDWORLD Right-Angled NEMA 5-15/5-20R 15/20A 125V White
Right-angled ETL-listed female connector accepts NEMA 5-15 and 5-20 plugs at 125 V with rated currents from 10 A to 20 A depending on cord gauge
- ETL listed safety certification for industrial use
- Right-angled design eases installation in tight spaces
- 2-in-1 NEMA 5-15R and 5-20R compatibility fits both plug types
- Rated 20 A at 125 V with 12 AWG cord
- Nylon housing shields live parts and resists heat rise
Right-Angled NEMA 5-15/5-20R Connector
This ETL listed female connector accepts both NEMA 5-15 and NEMA 5-20 plugs at up to 125 volts. It is built for industrial and commercial wiring jobs where a compact right-angled cord end is needed. Electricians and DIY installers can rewire it quickly for temporary power distribution or equipment hook-ups.
Nylon Housing With Dust Shield
The insulated nylon body covers live metal parts on the hand-held side to reduce accidental contact. An internal dust shield keeps the terminal screws free of debris during installation and service. Heavy-duty plastic casing and industrial-grade blades resist heat rise and maintain conductivity over repeated mating cycles.
Ampacity By Wire Gauge
Rated currents vary with the cord size used: 20 amps with 12 AWG, 18 amps with 14 or 13 AWG, 13 amps with 16 or 15 AWG, and 10 amps with 18 or 17 AWG. The metal contacts are designed to limit temperature rise at these loads. Not suitable for applications that require a straight-body connector or a higher voltage rating.
Highlights
- ETL listed safety certification for industrial use
- Right-angled design eases installation in tight spaces
- 2-in-1 NEMA 5-15R and 5-20R compatibility fits both plug types
- Rated 20 A at 125 V with 12 AWG cord
- Nylon housing shields live parts and resists heat rise
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What amperage does the NEMA 5-15/5-20R connector support with 12 AWG wire?
The connector is rated for 20 amps at 125 volts when used with 12 AWG cord.
What cord gauges fit the terminal openings on this right-angled plug?
Accepts wire from 18 AWG up to 12 AWG; the terminal screws clamp solid or stranded conductors in that range.
How do you wire the hot, neutral and ground terminals correctly?
Loosen the brass screw for hot (black), silver screw for neutral (white) and green screw for ground (green/bare); tighten each after inserting stripped wire.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



