We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black PCIe 5.0 riser cable with right-angle connector, 200mm long

LORDWORLD

LORDWORLD PCIe 5.0 x16 Riser Cable 90 Degree 200mm

SKU CH-9AP4-Z3MPZ

A 200 mm PCIe 5.0 x16 riser with a 90-degree connector delivers up to 512 Gbps for RTX 50-series and RX 9000-series cards

  • Supports RTX 5050 5060 5070 5080 5090 and RX 9060 9070 graphics cards
  • Delivers up to 512 Gbps bandwidth with PCIe 5.0 x16 Gen5
  • Flat 0.8 mm cable with silver-plated wires for flexible routing
  • Conductive polymer EMI shielding blocks interference for clean signals
  • 90 degree 200 mm riser fits tight chassis layouts

PCIe 5.0 Riser Cable 200mm

The LORDWORLD PCIe 5.0 x16 riser cable extends a graphics card connection by 200mm using a 90 degree adapter. It supports Gen5 bandwidth up to 512 Gbps and uses 30AWG silver-plated wires in a flat 0.8mm design.

Builders fitting RTX 5050 5060 5070 5080 5090

This cable suits small-form-factor builds that need a right-angle connection for the latest PCIe 5.0 graphics cards. It will not help buyers who want a straight connector, a longer reach or support for older PCIe generations only.

Verify motherboard slot spacing and case clearance

Check that the 90 degree plug orientation matches your motherboard PCIe slot layout and that 200mm of cable length fits the routing path. Confirm the graphics card bracket aligns with the case expansion slots after the riser is installed.

Highlights

  • Supports RTX 5050 5060 5070 5080 5090 and RX 9060 9070 graphics cards
  • Delivers up to 512 Gbps bandwidth with PCIe 5.0 x16 Gen5
  • Flat 0.8 mm cable with silver-plated wires for flexible routing
  • Conductive polymer EMI shielding blocks interference for clean signals
  • 90 degree 200 mm riser fits tight chassis layouts

Specifications

BrandLORDWORLD

Questions about this item

Do I need a motherboard with a PCIe 5.0 x16 slot to use this riser cable?

Yes, the cable is rated for PCIe 5.0 x16 Gen5 at 512 Gbps and requires a matching slot on the motherboard to deliver full bandwidth.

Will this 90-degree 200mm cable fit alongside an older graphics card that uses a PCIe 4.0 interface?

The riser is backward compatible and will operate at PCIe 4.0 speeds when paired with a 4.0 graphics card, but the 90-degree angle and 200mm length must still clear your case layout.

How can I verify the cable is running at the full 512 Gbps after installation?

Check the link speed in GPU-Z or your motherboard BIOS; it should report PCIe 5.0 x16 when a compatible RTX 50-series or RX 9000-series card is installed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.