We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LORDWORLD PCI-E card with two USB 3.0 ports and a 19-pin power connector

LORDWORLD

LORDWORLD PCI-E to USB 3.0 2 Port Expansion Card 19-Pin

SKU CH-5V5P-AZVDT

Adds two USB 3.0 ports via a PCI Express slot with a 19-pin power connector

  • Adds two USB 3.0 ports via PCI Express
  • 19-pin power connector supplies stable current
  • Fits PCIe x1, x4, x8 and x16 slots
  • Good Quality build from LORDWORLD
  • First listed by manufacturer in July 2026

PCI-E USB 3.0 expansion card

This LORDWORLD expansion card adds two USB 3.0 ports to a desktop computer through any PCI Express slot. It accepts x1, x4, x8 or x16 slots and draws supplementary power from a 19-pin connector. The board is sold new.

Builders adding front-panel USB ports

The card suits system integrators and enthusiasts who need extra Type-A ports for front-panel headers or external brackets. It does not suit users who require internal USB-C headers, more than two ports, or a low-profile bracket because those features are not present.

19-pin power connector requirement

A spare 19-pin header on the motherboard or an adapter cable is mandatory for the card to deliver full USB 3.0 power to both ports. Without that connection the ports may not operate at the rated 3.0 speed.

Highlights

  • Adds two USB 3.0 ports via PCI Express
  • 19-pin power connector supplies stable current
  • Fits PCIe x1, x4, x8 and x16 slots
  • Good Quality build from LORDWORLD
  • First listed by manufacturer in July 2026

Specifications

BrandLORDWORLD

Questions about this item

What PCI Express slot width does the LORDWORLD card require?

The LORDWORLD card fits any PCIe 1X, 4X, 8X or 16X slot, so it works in the smallest x1 slot your motherboard provides.

Will the 19-pin power connector draw from my existing PSU cables?

Yes, the 19-pin connector plugs into a standard internal USB 3.0 header on the motherboard, so no extra PSU cables are needed.

How can I confirm both USB 3.0 ports are running at 3.0 speed after install?

Open Device Manager, locate the new USB controller and verify each attached device shows SuperSpeed USB 3.0 in its connection details.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.