We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with four SATA ports and one eSATA bracket, full-height PCIe bracket, gold edge connector

LORDWORLD

LORDWORLD PCI-E to 4 Ports SATA 3.0 ESATA Adapter

SKU CH-FGYP-G6HMB

Adds four SATA 3.0 ports via PCI Express, with two active simultaneously via jumper selection

  • Add up to four drives with two active simultaneously via jumper
  • Transfer data at SATA 3.0 6Gbps speeds with AHCI support
  • Swap drives without shutdown using hot-plug and NCQ
  • Works with Windows, Linux and Mac OS X 10.6+
  • Fits any PCI Express x1, x2, x4, x8 or x16 slot

PCI-E SATA 3.0 adapter for desktop expansion

This PCI Express card adds four SATA 3.0 ports to a desktop computer. It fits x1, x2, x4, x8 or x16 slots and supports 6 Gbps data rates. The board works with Windows, Linux and Mac OS X 10.6 and above. Windows 7 and 8 are not supported.

Dual-port limitation with jumper selection

Only two of the four ports operate simultaneously. A jumper on the PCB selects which pair is active. This means you cannot connect four drives at once without changing the jumper setting. Hot-plug and Native Command Queuing are supported on the active ports.

Standard bracket and internal connectors

The card uses a standard PCI Express bracket for typical desktop cases. Internal SATA connectors accept regular data cables. Drives up to 2 TB are supported on the active ports. Builders needing more than two simultaneous SATA devices should consider a different controller.

Highlights

  • Add up to four drives with two active simultaneously via jumper
  • Transfer data at SATA 3.0 6Gbps speeds with AHCI support
  • Swap drives without shutdown using hot-plug and NCQ
  • Works with Windows, Linux and Mac OS X 10.6+
  • Fits any PCI Express x1, x2, x4, x8 or x16 slot

Specifications

BrandLORDWORLD

Questions about this item

Will I need to move a jumper on the board to use all four SATA ports?

The card only runs two ports at once, so you must set the jumper on the PCB to select which pair is active.

What throughput ceiling will I hit first when all active drives are streaming data?

Each active port tops out at the SATA 3.0 6Gbps link rate, so that interface speed is the first bottleneck under sustained load.

Does the adapter draw enough power to need extra cooling when it runs all day?

It draws power only from the PCI Express slot and has no fan, so heat stays low during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.