We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A flat green PCI-E 8X riser board connected by a thin flexible ribbon cable to a matching female slot, 20cm long

LORDWORLD

LORDWORLD PCI-E 8X to 8X Riser Extender Cable 20cm

SKU CH-T3FH-FW6XD

A 20 cm PCIe 3.0 riser cable extends an 8x slot for 1x, 4x or 8x cards in compact 1U to 3U chassis

  • Extends PCIe 8X connections up to 20 cm
  • Layered PCB design maintains signal quality at PCIe 3.0 speeds
  • Flexible FFC ribbon fits 1U, 2U and 3U chassis
  • Male-to-female 8X slot accepts 1X, 4X and 8X cards
  • 20 cm length enables versatile GPU or add-in card placement

What this cable does

The LORDWORLD PCI-E 8X to 8X riser extends a motherboard slot by 20 cm using a high-speed flexible flat cable. It carries a PCIe 3.0 link and accepts 1X, 4X or 8X expansion cards in a single-slot board.

Who should use it

Builders fitting cards into 1U, 2U or 3U server chassis where the slot cannot reach the add-in board will find the ribbon layout practical. It is not suited for users who need a longer reach than 20 cm or who require a shielded cable for heavy EMI environments.

Installing the riser

Plug the male edge connector into the motherboard, attach the card to the female socket and route the flat cable through the chassis. The thin ribbon bends easily but can crease if folded sharply; avoid tight kinks and keep the connector latch engaged to prevent signal loss.

Highlights

  • Extends PCIe 8X connections up to 20 cm
  • Layered PCB design maintains signal quality at PCIe 3.0 speeds
  • Flexible FFC ribbon fits 1U, 2U and 3U chassis
  • Male-to-female 8X slot accepts 1X, 4X and 8X cards
  • 20 cm length enables versatile GPU or add-in card placement

Specifications

BrandLORDWORLD

Questions about this item

Does this 20 cm riser cable need any extra power connector to run a PCIe 3.0 graphics card?

No separate power connector is on the riser; the card draws power through the PCIe slot itself.

Will a PCIe 1.0 or 2.0 card work in this 8X extender without changing BIOS settings?

The cable supports PCIe 1X, 4X and 8X cards and is backward compatible with earlier PCIe generations.

How can I confirm the link is running at the full 8X width after I install the card?

Check the negotiated link width in the operating system device manager or with a tool such as GPU-Z; it should show x8.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.