We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCIe add-in card with silver SFF-8612 connector and metal bracket

LORDWORLD

LORDWORLD PCI-E 3.0 4.0 x4 SFF-8612 Host Adapter with Bracket

SKU CH-6XQ1-2M0FV

Adds a PCIe 3.0/4.0 x4 SFF-8612 port for NVMe SSDs with UEFI 2.3.1 boot support

  • Adds one SFF-8612 port to your PC for NVMe SSD connection
  • Runs at PCIe 3.0 and 4.0 x4 speeds for fast data transfer
  • Supports NVMe 1.2 protocol for modern solid-state drives
  • Boots from NVMe SSD with UEFI 2.3.1 firmware support
  • Uses SFF-8611 connector for compatible cable attachment

Single SFF-8612 expansion for NVMe SSD

This LORDWORLD PCIe add-in card adds one SFF-8612 port to a desktop system. It carries NVMe traffic over a PCI Express 3.0 or 4.0 x4 slot. The adapter is bootable with UEFI 2.3.1 firmware support. An optional cable is required to attach a drive.

Passive cooling and slot power only

The card uses a passive heatsink with no fan, so it adds no audible noise. It draws power directly from the PCIe slot without external connectors. Typical throughput follows the host slot generation, either 3.0 or 4.0 x4. No supplementary power cable is needed.

Low-profile bracket and internal cabling

A low-profile bracket is included for small-form-factor chassis. The SFF-8612 connector faces the rear slot opening, so cable routing stays inside the case. Build quality uses a standard PCB thickness and gold-finger edge connector. Mating SFF-8611 cables are sold separately.

Highlights

  • Adds one SFF-8612 port to your PC for NVMe SSD connection
  • Runs at PCIe 3.0 and 4.0 x4 speeds for fast data transfer
  • Supports NVMe 1.2 protocol for modern solid-state drives
  • Boots from NVMe SSD with UEFI 2.3.1 firmware support
  • Uses SFF-8611 connector for compatible cable attachment

Specifications

BrandLORDWORLD

Questions about this item

How do I install the SFF-8612 host adapter in a PCIe 3.0 x4 slot and what step is often missed?

Insert the card into a PCIe 3.0 or 4.0 x4 slot, secure the bracket, then connect an optional SFF-8612 cable to the SSD; the step often missed is enabling UEFI 2.3.1 boot support in the motherboard firmware so the drive is recognised at startup.

What maintenance or replacement will the LORDWORLD adapter need over time?

The adapter itself has no moving parts or wear items; only the optional SFF-8612 cable or the connected NVMe SSD may require replacement if they fail or if you upgrade storage capacity later.

What limit appears first when the card runs sustained NVMe 1.2 workloads?

The bottleneck is the PCIe 3.0 x4 or 4.0 x4 link bandwidth shared with the motherboard; thermal throttling of the attached SSD typically occurs before the adapter reaches any electrical limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.