We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PCI-E 1x to 16x riser board with USB 3.0 cable, 60 cm SATA power lead, four capacitors, locking 16x slot

LORDWORLD

LORDWORLD PCI-E 1x to 16x Enhanced Extender Riser Adapter USB 3.0 60cm SATA 15pin to 6pin Power Cable

SKU CH-B519-2D1HM

PCI-E 1x to 16x riser with USB 3.0 cable, four solid capacitors and SATA 15-pin to 6-pin power for stable multi-GPU setups

  • Stable GPU power delivery via 4 FP solid capacitors
  • SATA 15-pin to 6-pin cable strengthens external power supply
  • 60 cm USB 3.0 cable allows flexible riser placement
  • Locking PCI-E 16x slot secures graphics card firmly
  • Compatible with 1x 4x 8x 16x expansion cards

PCI-E 1x to 16x Riser for Multi-Card Builds

This LORDWORLD adapter converts a single PCI-E 1x slot into a full-size 16x connection using a 60cm USB 3.0 cable. Four FP solid capacitors stabilise the graphics power delivery, while the included SATA 15-pin to 6-pin cable draws power directly from the PSU. The design removes the load from the motherboard, making it practical for multi-card configurations.

Suited for miners and testers needing flexible GPU

Builders who rely on motherboard-powered risers without auxiliary power should look elsewhere, as this unit requires a free SATA power connector. Systems without a spare 1x slot or with limited cable-routing space may also find the 60cm length restrictive.

60cm USB 3.0 cable length

The fixed 60cm link between the 1x plug and the 16x slot determines how far the graphics card can sit from the motherboard. Measure the intended gap before purchase, as no shorter or longer variant is described in the data.

Highlights

  • Stable GPU power delivery via 4 FP solid capacitors
  • SATA 15-pin to 6-pin cable strengthens external power supply
  • 60 cm USB 3.0 cable allows flexible riser placement
  • Locking PCI-E 16x slot secures graphics card firmly
  • Compatible with 1x 4x 8x 16x expansion cards

Specifications

BrandLORDWORLD

Questions about this item

How much power does the 60 cm USB 3.0 cable draw when the riser runs continuously?

The adapter uses four FP solid capacitors to stabilise the graphics power supply and includes a SATA 15pin to 6pin cable that feeds the card directly, removing load from the motherboard.

What motherboard slot and power connector must I already have to use this riser?

You need a free PCI-E 1x slot (also accepts 4x, 8x, 16x) and a spare SATA 15pin power lead from your PSU for the included 6pin adapter.

Will a legacy PCI-E 1x graphics card seat securely in the 16x slot with lock?

Yes, the riser is compatible with 1x, 4x, 8x and 16x cards, and the locking 16x slot holds the card firmly so it cannot fall out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.