We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat ribbon cable twenty centimetres long with a right-angled PCIe sixteen-lane female socket at one end

LORDWORLD

LORDWORLD PCI-E 16X Riser Extender Cable 20cm

SKU CH-F27F-DS6XQ

Extends a PCIe 16X slot by 20 cm with a flexible FFC ribbon cable for 1U, 2U, 3U chassis and supports 1X, 4X, 8X, 16X cards

  • Extends graphics cards 20 cm with a flexible FFC ribbon
  • Layered PCB design maintains signal integrity at full 16-lane bandwidth
  • Male-to-female 16X connector keeps the original slot orientation
  • Fits 1U, 2U and 3U chassis where space is tight
  • Accepts x1, x4, x8 and x16 cards without adapters

Compact PCIe 16X Riser for Dense Chassis

This 20cm ribbon cable extends a PCIe 16X slot from the motherboard to a more accessible position. It accepts 1X, 4X, 8X and 16X expansion cards, making it suitable for compact 1U, 2U and 3U server enclosures where full-length cards cannot fit directly. The male-to-female design connects without adapters.

Passive Thermals and Signal Integrity

The flat FFC ribbon and layered PCB construction carry signals without active cooling or external power. Because the cable is short and passive, it adds negligible resistance and produces no audible noise. Power draw remains that of the installed expansion card alone, with no overhead from the riser itself.

Ready-to-Install Cable Assembly

The product ships as a single integrated riser board with attached ribbon cable and a female 16X socket. No separate brackets, screws, drivers or configuration utilities are included or required. Builders simply plug the male edge connector into the motherboard, route the flexible ribbon, and seat the target card into the female slot.

Highlights

  • Extends graphics cards 20 cm with a flexible FFC ribbon
  • Layered PCB design maintains signal integrity at full 16-lane bandwidth
  • Male-to-female 16X connector keeps the original slot orientation
  • Fits 1U, 2U and 3U chassis where space is tight
  • Accepts x1, x4, x8 and x16 cards without adapters

Specifications

BrandLORDWORLD

Questions about this item

How do I install the 20 cm ribbon cable into a 1U chassis?

Plug the male PCIe 16X connector into the motherboard slot, route the flexible FFC ribbon, then seat the female riser card in the chassis bracket; the step often missed is securing the riser card so the ribbon does not pull loose.

What maintenance will the riser card and ribbon need over time?

Inspect the gold fingers and ribbon for dust or oxidation every few months; reseat both connectors if contact resistance appears, and replace the ribbon if the flexible cable shows creases or cracked traces.

What limit appears first when the extender runs at full 16X bandwidth continuously?

Signal integrity across the 20 cm high-speed FFC ribbon degrades before the PCB or connectors do, so sustained 16X throughput may become unstable if the cable is bent sharply or routed near noise sources.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.