We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter card with silver finned heatsinks covering two M.2 slots and a PCIe x4 edge connector

LORDWORLD

LORDWORLD PA12-HS Dual M.2 NVMe SATA SSD Adapter with Heatsink PCIe 4.0

SKU CH-G1RM-6P7V0

Adds one M.2 NVMe and one M.2 SATA SSD via PCIe 4.0 x4 with dual heatsinks cooling 5°C–20°C

  • Add two drives in one slot with dual M-key and B-key support
  • NVMe runs at PCIe 4.0 x4 speeds when platform matches
  • Included heatsinks lower drive temps by 5°C to 20°C
  • FCC and CE certified for stable full-speed operation
  • Boots OS from NVMe on compatible motherboards

Dual M.2 NVMe and SATA adapter

This adapter fits one M.2 NVMe SSD in the lower M-key slot and one M.2 SATA SSD in the upper B-key slot. The NVMe drive connects through the PCIe 4.0 x4 interface while the SATA drive uses a separate SATA III cable included in the package. Both channels operate independently so each drive keeps its native protocol performance. Builders adding fast boot storage and extra SATA capacity to a desktop will find this a compact solution.

Heatsink thermal performance under load

Two dedicated heatsinks cover both M.2 drives and deliver a 5°C to 20°C temperature drop that varies with case airflow. The cooling keeps each SSD within safe limits during sustained full-load operation so throttling is avoided. FCC and CE certification confirms stable PCIe x4 signalling at 64Gbps when the CPU, motherboard slot and NVMe drive all support the 4.0 standard. Older platforms below the 11th generation Intel line cannot reach that bandwidth.

Installation notes and common issues

The card plugs into a free PCIe x4 slot and the SATA cable routes to a motherboard header; no extra drivers are required for Windows 10, 11, 8, Linux or Mac OS. A fresh NVMe drive must be initialised and formatted before the OS sees it. Booting from the NVMe SSD needs a UEFI BIOS that supports NVMe boot; some older boards lack this feature so the drive can only serve as secondary storage. Windows 7 recognises the SATA SSD but not the NVMe device.

Highlights

  • Add two drives in one slot with dual M-key and B-key support
  • NVMe runs at PCIe 4.0 x4 speeds when platform matches
  • Included heatsinks lower drive temps by 5°C to 20°C
  • FCC and CE certified for stable full-speed operation
  • Boots OS from NVMe on compatible motherboards

Specifications

BrandLORDWORLD

Questions about this item

How hot do the dual heatsinks keep M.2 drives during all-day full-load operation?

The two heatsinks lower drive temperatures by 5°C to 20°C depending on case airflow, keeping both SSDs within safe limits even under sustained full load.

What motherboard connections are required for the NVMe and SATA slots to function?

The NVMe slot needs a PCIe 4.0 x4 slot, while the SATA slot requires a free motherboard SATA III port and the included SATA cable.

Will the NVMe drive run at PCIe 4.0 speeds on an Intel 10th-gen CPU?

No, PCIe 4.0 x4 (64Gbps) requires an 11th-generation or newer Intel CPU, a PCIe 4.0 motherboard slot and a PCIe 4.0 NVMe SSD; older CPUs limit the link to PCIe 3.0 speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.