We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot and Oculink connectors

LORDWORLD

LORDWORLD Oculink SFF-8612 SFF-8611 to M.2 NVME Adapter Kit

SKU CH-BC7Q-1E8K6

Connects M.2 NVME SSDs in 2230, 2242, 2260, 2280 and 22110 sizes to a mainboard via Oculink SFF-8611 or SFF-8612 using a PCIe 3.0 x4 interface

  • Connect multiple NVMe SSD sizes via Oculink 8611/8612
  • PCIe 3.0 x4 bandwidth for fast NVMe storage
  • Supports M.2 2230 2242 2260 2280 22110 form factors
  • Internal SFF-8611/8612 connection for compact system builds
  • NVMe only — no SATA or SAS signal conversion

Oculink SFF-8612 SFF-8611 M.2 NVMe Adapter Kit

This adapter kit connects an M.2 NVMe PCIe SSD to a system through internal Oculink SFF-8611 or SFF-8612 interfaces. It operates as a PCIe 3.0 x4 ultra card and supports M-key M.2 drives in 2230, 2242, 2260, 2280 and 22110 form factors. The kit is designed for internal installation on compatible mainboards.

Builders adding NVMe storage via Oculink

This kit suits builders who have an available Oculink port and want to install an M.2 NVMe SSD internally. It does not support SAS or Slimeline SAS drives, so users with those drive types should look elsewhere. It also cannot convert NVMe to SATA or NGFF SATA to Oculink, so builders needing SATA connectivity must choose a different adapter.

PCIe 3.0 x4 interface limitation

The adapter functions as a PCIe 3.0 x4 card, which determines the maximum bandwidth available to the connected NVMe SSD. Buyers should verify their Oculink port provides a compatible PCIe 3.0 x4 link to avoid bottlenecks. This single specification decides whether the adapter matches the performance needs of the target drive.

Highlights

  • Connect multiple NVMe SSD sizes via Oculink 8611/8612
  • PCIe 3.0 x4 bandwidth for fast NVMe storage
  • Supports M.2 2230 2242 2260 2280 22110 form factors
  • Internal SFF-8611/8612 connection for compact system builds
  • NVMe only — no SATA or SAS signal conversion

Specifications

BrandLORDWORLD

Questions about this item

How do I install an M.2 NVME SSD into the adapter and connect it to the mainboard via the SFF-8611 or SFF-8612 Oculink interface?

Insert the M-key NVME drive (2230, 2242, 2260, 2280 or 22110) into the M.2 slot, secure it with the standoff screw, then plug the adapter into the motherboard's SFF-8611 or SFF-8612 Oculink port using a compatible cable; the step often missed is confirming the motherboard port is wired for PCIe 3.0 x4, not SAS or SATA.

What maintenance or replacement will this adapter kit need over time?

The passive adapter has no moving parts or firmware, so it requires no scheduled maintenance; only the M.2 NVME SSD itself may eventually wear out and need replacement, while the Oculink cable and connectors should be reseated if connection issues appear after repeated thermal cycles.

What is the first performance limit I will hit under sustained heavy I/O with this PCIe 3.0 x4 adapter?

The hard ceiling is the PCIe 3.0 x4 link, which caps sequential throughput at roughly 4 GB/s regardless of how fast the NVME SSD is rated; the adapter adds no active cooling, so prolonged writes may also throttle the drive once its own thermal limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.