We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight 50cm active cable with SFF-8611 80-pin male connectors both ends

LORDWORLD

LORDWORLD OCuLink SFF-8611 8x Active Cable 50cm

SKU CH-1QZY-11B7B

Active 50 cm cable links two OCuLink SFF-8611 8x 80-pin ports at up to 16 Gbps with locking latches

  • Connects backplane to controller with 80-pin OCuLink 8611 interface
  • Active latch secures connection for reliable internal data links
  • Supports up to 16 Gbps transfer for high-speed SSD arrays
  • 50 cm length fits compact chassis routing needs
  • Requires free OCuLink 8x 80-pin port on both devices

Connection Cable 50cm

The LORDWORLD OCuLink SFF-8611 8x active cable links a backplane or SSD enclosure to a controller inside a chassis. Both ends carry an 80pin male connector rated for eight lanes. An active latch secures each plug against vibration. The 50cm length suits compact server or workstation builds.

Bandwidth Ceiling 16Gbps

The link tops out at 16Gbps across the eight-lane interface. Signal conditioning inside the active assembly preserves integrity at that rate over the given length. Performance will not exceed this ceiling even if the attached controller or backplane supports a faster standard.

Verify Free 80pin Port

Confirm the host board or controller exposes a free OCuLink 8x 80pin receptacle before ordering. The cable occupies a single such port on each side. Builds lacking an available 80pin header cannot use this link without an additional adapter or riser.

Highlights

  • Connects backplane to controller with 80-pin OCuLink 8611 interface
  • Active latch secures connection for reliable internal data links
  • Supports up to 16 Gbps transfer for high-speed SSD arrays
  • 50 cm length fits compact chassis routing needs
  • Requires free OCuLink 8x 80-pin port on both devices

Specifications

BrandLORDWORLD

Questions about this item

What length of active OCuLink SFF-8611 8x cable should I pick for a typical chassis?

The cable is 50 cm long, which suits most internal connections between a backplane and a controller.

What does the 16 Gbps rate mean for my SSD array?

The link runs at up to 16 Gbps across eight lanes, providing high-speed data paths for attached drives.

How does the SFF-8611 80-pin interface limit performance?

The SFF-8611 8x connector caps the link at 16 Gbps and uses an active latch for secure mating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.