LORDWORLD
LORDWORLD OCuLink SFF-8611 4i Male to Male Active Cable 90 Degree 50cm PCIe 4.0 64Gbps
Active 90-degree OCuLink cable carries PCIe 4.0 at 64Gbps between SFF-8611 ports in tight spaces
- Active latch secures the connection without accidental disconnection
- 90 degree angled plug fits tight spaces around the female port
- 50 cm length reaches internal devices without excess cable
- PCIe 4.0 signals delivered at up to 64 Gbps through the OCuLink protocol
- SFF-8611 male to male links backplanes and controllers directly
90° OCuLink SFF-8611 Active Cable
This 50cm active cable connects two OCuLink SFF-8611 male ports at a 90° angle. It transmits PCIe 4.0 signals at up to 64Gbps. The angled design fits tight spaces around the female connector. An active latch secures the connection to the mating part.
Internal Backplane and eGPU Builds
Builders linking a backplane or eGPU enclosure to a host controller with SFF-8611 ports will find the right length and angle. Systems without a free OCuLink interface cannot use this cable. Buyers needing a straight connector or a different cable length should look elsewhere.
PCIe 4.0 64Gbps Signal Integrity
The active circuitry maintains PCIe 4.0 protocol integrity at 64Gbps across the 50cm run. This specification decides whether the link supports the intended storage or GPU bandwidth. Verify that both endpoints operate at PCIe 4.0 before purchasing.
Highlights
- Active latch secures the connection without accidental disconnection
- 90 degree angled plug fits tight spaces around the female port
- 50 cm length reaches internal devices without excess cable
- PCIe 4.0 signals delivered at up to 64 Gbps through the OCuLink protocol
- SFF-8611 male to male links backplanes and controllers directly
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Does the 50 cm active cable add noticeable heat or power draw when running continuously?
The cable is passive in operation and draws no extra power beyond the PCIe 4.0 signal; it adds no measurable heat during all-day use.
What must my system already have for this SFF-8611 4i male-to-male cable to work?
You need two free OCuLink SFF-8611 female ports — one on the host controller and one on the backplane or device.
Will this 64 Gbps PCIe 4.0 cable work with older PCIe 3.0 OCuLink equipment I keep?
Yes, the link trains down to PCIe 3.0 speeds automatically while keeping the same 90-degree latch connection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114592BTC
In stock
