We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M-key edge connector and dual 20-pin USB 3.1 Type-E headers

LORDWORLD

LORDWORLD NVME to Dual USB 3.1 Type-E Front Panel Adapter

SKU CH-RMR7-WKYMG

Converts a motherboard NVME M-Key slot into dual USB 3.1 20-pin Type-E front-panel headers at 10 Gbps

  • Converts an NVME M-Key slot into dual USB 3.1 front-panel headers
  • Supports up to 10 Gbps bandwidth for fast data transfer
  • Compact plug-in design installs directly with no extra attachments needed
  • Fits any standard USB 3.1 20-pin Type-E header on the motherboard
  • Adds front-panel USB 3.1 connectivity to cases lacking native motherboard support

Compact NVME-to-USB adapter

This LORDWORLD adapter plugs directly into a motherboard NVME M-Key slot and presents two USB 3.1 Type-E front-panel headers. It lets a case front USB 3.1 port operate at full speed even when the board lacks a native header. No extra cables or brackets are required for installation.

Sustained 10 Gbps throughput

The converter maintains up to 10 Gbps across both ports during extended transfers rather than only in short bursts. Bandwidth is shared between the two headers, so simultaneous heavy traffic on both will divide the available throughput.

Direct M-Key mounting

The card seats in the M-Key slot without screws or adapters, keeping the build tidy and the signal path short. Builders whose motherboards already populate every M-Key slot with storage cannot use this adapter without freeing a slot.

Highlights

  • Converts an NVME M-Key slot into dual USB 3.1 front-panel headers
  • Supports up to 10 Gbps bandwidth for fast data transfer
  • Compact plug-in design installs directly with no extra attachments needed
  • Fits any standard USB 3.1 20-pin Type-E header on the motherboard
  • Adds front-panel USB 3.1 connectivity to cases lacking native motherboard support

Specifications

BrandLORDWORLD

Questions about this item

Does the adapter draw noticeable power or generate heat when the front-panel ports are used all day?

The adapter is a passive converter that plugs directly into the NVME M-Key slot and requires no external power, so it adds negligible heat or power draw during continuous use.

What motherboard slot must be free for this adapter to work?

An available NVME M-Key slot on the motherboard is required; the adapter inserts directly into that slot to provide the dual USB 3.1 front-panel headers.

Will the dual Type-E headers function correctly with an older case that only has standard USB 3.0 front-panel connectors?

The adapter outputs dual USB 3.1 20-pin Type-E headers; compatibility with older USB 3.0 case connectors depends on whether the case cable or a separate adapter matches the Type-E pinout.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.