We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent NVMe enclosure with aluminum plate, USB-C cables and thermal pads

LORDWORLD

LORDWORLD NVME SSD Enclosure Transparent 10Gbps 2230-2280

SKU CH-K2KX-D100J

Holds M-key NVME SSDs from 2230 to 2280, transfers up to 10 Gbps via USB 3.1 Gen 2 with JMS583 controller, tool-free transparent case with aluminium cooling and LED status

  • Tool-free installation gets an NVME SSD running in under three minutes
  • JMS583 controller with UASP and TRIM delivers up to 10 Gbps transfer speed
  • Transparent case lets you identify the drive while the alloy plate reduces overheating
  • Supports M-Key PCIe NVME SSDs in 2230, 2242, 2260 and 2280 sizes up to 2 TB
  • Works with Windows, Linux and Mac OS, includes both USB-C and USB-A cables

Transparent NVMe Enclosure 10Gbps

The LORDWORLD enclosure converts an M-Key NVME M.2 solid-state drive into a portable USB-C device. A clear top lets you confirm the installed drive at a glance while an aluminium plate on the opposite side helps dissipate heat. Tool-free assembly means the SSD can be fitted and connected in under three minutes with no driver installation required.

Users needing quick external NVME storage

This enclosure suits anyone who wants to move a compatible NVME SSD between Windows, Linux or macOS systems using the supplied USB-C to USB-C and USB-A to USB-C cables. It is not for anyone whose drive uses a B-Key or B+M-Key connector, or who needs to house an SSD larger than the 2280 form factor or beyond the 2TB capacity limit.

JMS583 controller with UASP and TRIM

The JMS583 bridge enables the USB 3.1 Gen 2 Type-C interface to reach 10 Gbps, delivering sequential read and write rates up to 950 MB/s with supported NVME drives. Hot-swap capability and a status LED complete the feature set for drive management on the go.

Highlights

  • Tool-free installation gets an NVME SSD running in under three minutes
  • JMS583 controller with UASP and TRIM delivers up to 10 Gbps transfer speed
  • Transparent case lets you identify the drive while the alloy plate reduces overheating
  • Supports M-Key PCIe NVME SSDs in 2230, 2242, 2260 and 2280 sizes up to 2 TB
  • Works with Windows, Linux and Mac OS, includes both USB-C and USB-A cables

Specifications

BrandLORDWORLD

Questions about this item

How do I install an NVME M.2 2280 SSD in this tool-free enclosure and what step is often missed?

Slide the SSD into the JMS583 controller slot at a slight angle, press down until it clicks into the latch, then close the transparent cover — the step many skip is placing the included thermal pads on the controller side before sealing the case.

Which parts will need replacement after heavy use?

The two supplied thermal pads can dry out or lose contact over time; replacing them with fresh 1 mm pads keeps the aluminum plate pulling heat off the drive.

What is the first bottleneck during long sequential transfers?

The USB 3.1 Gen 2 Type-C link caps sustained throughput at 10 Gbps, so real-world read and write speeds plateau around 950 MB/s even if the NVME SSD is faster.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.