We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 30cm cable with right-angled M-key NVME connectors at both ends

LORDWORLD

LORDWORLD NVME Male-Female Extension Cable 30cm 90° PCI-E 4.0 2230-22110

SKU CH-H6YZ-A92HJ

A 30 cm PCI-E 4.0 extension cable with a 90° M-key connector links NVME or SATA SSDs from 2230 to 22110 form factors

  • 30 cm length reaches tight motherboard slots
  • 90 degree right-angle connector clears low-profile heatsinks
  • PCI-E 4.0 bandwidth supports fast NVME drives
  • Fits 2230 2240 2242 2260 2280 22110 form factors
  • Flexible PVC jacket eases routing in compact builds

M-Key NVMe Extension Cable

This new LORDWORLD cable extends an M-Key NVMe drive away from the motherboard socket by 30 centimetres. A 90-degree right-angled connector allows installation in tight clearance where a straight plug would foul neighbouring components. The assembly includes two PCBAs joined by a flexible PVC-sheathed cable designed for repeated bending. It is suited to builders who need to relocate an NVMe SSD without changing its electrical interface.

PCIe 4.0 Signal Integrity Under Load

The cable is rated for PCI Express 4.0 speeds across its full 30-centimetre length. Copper conductors and the integrated PVC jacket maintain consistent impedance during sustained read and write workloads, preventing the signal degradation that cheaper ribbons exhibit under thermal cycling. It supports NVMe-to-NVMe or SATA-to-SATA extension only, so protocol conversion is not possible and the host controller must match the drive protocol.

Length and Form-Factor Constraints

At 30 centimetres the cable reaches adjacent M.2 slots or remote mounting brackets but cannot span full-tower chassis distances. Supported drive lengths are 2230, 2240, 2242, 2260, 2280 and 22110, so the longest 22110 modules fit while shorter modules sit on the same female connector. Builders who need longer reach or protocol translation between NVMe and SATA must choose a different solution.

Highlights

  • 30 cm length reaches tight motherboard slots
  • 90 degree right-angle connector clears low-profile heatsinks
  • PCI-E 4.0 bandwidth supports fast NVME drives
  • Fits 2230 2240 2242 2260 2280 22110 form factors
  • Flexible PVC jacket eases routing in compact builds

Specifications

BrandLORDWORLD

Questions about this item

Does the 90-degree right-angled connector generate extra heat during continuous PCI-E 4.0 operation?

The cable uses copper conductors and a flexible PVC jacket designed for signal integrity, not active cooling. It adds no measurable heat beyond the SSD and motherboard during all-day use.

What motherboard slot and SSD form factor are required to use this 30 cm extension?

You need an M-key M.2 slot wired for PCI-E or SATA and an M-key NVME or SATA SSD in 2230, 2242, 2260, 2280 or 22110 length. The cable does not cross protocol types.

Will this cable work with an older 2242 SATA M.2 drive kept from a previous build?

Yes. The extension supports SATA-to-SATA operation on 2242 drives as well as NVME-to-NVME, provided both the slot and the drive use the M-key interface.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.