We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver NVME M-Key enclosure for 2230 2242 drives

LORDWORLD

LORDWORLD NVME M-Key Enclosure 2230 2242 USB 3.1 Gen2 10Gbps

SKU CH-V5XE-1492V

Turns a 2230 or 2242 NVME M-Key SSD into a USB 3.1 Gen2 10Gbps external drive with JMS583 controller and UASP support

  • USB 3.1 Gen2 10 Gbps peak throughput for rapid NVME transfers
  • JMS583 controller with UASP and Trim support boosts speed and SSD longevity
  • Fits 2230 and 2242 M-key NVME drives only — no SATA or AHCI models
  • Backward compatible with USB 3.1 Gen1 and USB 3.0 at 5 Gbps
  • Tool-free slide-open design lets you swap drives in seconds

Portable NVMe Enclosure for 2230 and 2242 Drives

This enclosure turns a PCIe-based NVMe M-Key SSD in the 2230 or 2242 form factor into a USB 3.1 Gen2 external drive. It uses a JMS583 controller with UASP and Trim support to maintain performance and extend SSD lifespan. The aluminium housing acts as a heatsink for sustained operation.

Suits users with short M-Key NVMe modules seeking

Builders with SATA-based M.2 drives, PCIe AHCI modules, or non-M.2 SSDs cannot use this enclosure. It also excludes M.2 devices such as Wi-Fi or capture cards and mSATA drives. Users needing larger 2280 SSD support should look elsewhere.

Single specification that decides fit: M-Key NVMe

The enclosure only accepts PCIe-based NVMe M-Key solid state drives measuring 2230mm or 2242mm. Any other keying, protocol, or physical length will not work. Confirm your drive matches these exact parameters before purchase.

Highlights

  • USB 3.1 Gen2 10 Gbps peak throughput for rapid NVME transfers
  • JMS583 controller with UASP and Trim support boosts speed and SSD longevity
  • Fits 2230 and 2242 M-key NVME drives only — no SATA or AHCI models
  • Backward compatible with USB 3.1 Gen1 and USB 3.0 at 5 Gbps
  • Tool-free slide-open design lets you swap drives in seconds

Specifications

BrandLORDWORLD

Questions about this item

What speed does the USB 3.1 Gen2 10Gbps interface cap at in practice?

The enclosure runs at up to 10Gbps on USB 3.1 Gen2 and falls back to 5Gbps on USB 3.1 Gen1 or USB 3.0 ports.

Which M.2 SSD lengths fit inside the 2230 and 2242 slots?

Only NVMe M-Key drives in 2230 or 2242 form factors are supported; SATA, AHCI, Wi-Fi, capture cards and mSATA are not compatible.

How is the drive installed and what step is often missed?

Insert the NVMe M-Key SSD at an angle, secure it with the screw, then close the enclosure; the step people miss is confirming the drive is NVMe M-Key, not SATA or AHCI.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.