We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green PCBs linked by a flat 30cm PVC cable

LORDWORLD

LORDWORLD NGFF M-Key NVME Extender Card PCI-E 4.0 30cm Cable

SKU CH-X0BR-9HT7J

Extends M-Key NVME or SATA SSDs up to 30 cm with PCI-E 4.0 support for 64 Gbps NVME 1.4 and 6 Gbps SATA speeds

  • Extends M.2 NVME or SATA drives up to 30cm with flexible PVC cable
  • Supports NVME 1.4 speeds up to 64Gbps and SATA up to 6Gbps
  • Compatible with 2230, 2242, 2260, 2280 and 22110 form factors
  • Two PCBA boards and one 30cm cable included for direct socket-to-cable connection
  • PCI-E 4.0 riser maintains signal integrity without NVME-to-SATA conversion

M-Key NVME Extender with PCI-E 4.0

This adapter extends an M-Key NVME or SATA drive from a motherboard socket using a 30cm flexible cable. It supports 2230, 2242, 2260, 2280 and 22110 form factors on the drive side. The kit includes two PCBAs and the cable assembly. It is intended for builders who need to relocate an SSD away from the primary slot.

Bandwidth ceiling set by NVME 1.4 and SATA

The link operates at up to 64Gbps when an NVME 1.4 drive is installed, while SATA drives are limited to 6Gbps. The cable does not convert between NVME and SATA protocols; the drive and host must share the same interface. Length and signal integrity cap practical throughput at the rated maximums.

30cm cable fixes the maximum reach

The 30cm extension determines how far the drive can sit from the M-Key slot. Builds that require a longer run cannot use this part. The PVC-sheathed copper construction keeps the cable thin and pliable for tight routing inside a chassis.

Highlights

  • Extends M.2 NVME or SATA drives up to 30cm with flexible PVC cable
  • Supports NVME 1.4 speeds up to 64Gbps and SATA up to 6Gbps
  • Compatible with 2230, 2242, 2260, 2280 and 22110 form factors
  • Two PCBA boards and one 30cm cable included for direct socket-to-cable connection
  • PCI-E 4.0 riser maintains signal integrity without NVME-to-SATA conversion

Specifications

BrandLORDWORLD

Questions about this item

Which SSD form factors does the extender card support?

The card works with M.2 drives in 2230, 2242, 2260, 2280 and 22110 lengths.

What real-world bandwidth can I expect from the 64 Gbps NVMe 1.4 rating?

The PCIe 4.0 x4 link tops out at 64 Gbps, so an NVMe SSD will run at its full Gen 4 speed through the 30 cm cable.

Does the PCIe 4.0 interface limit the cable to NVMe drives only?

No — the same extender handles both NVMe and SATA NGFF drives, but it cannot convert between the two protocols.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.