LORDWORLD
LORDWORLD NGFF Key A+E to SATA 3.0 Dual Port Adapter JMB582 2230
Converts a Key A+E M.2 2230 slot into two SATA 3.0 ports using a JMB582 controller with NCQ for stable SSD operation at 6.0, 3.0 and 1.5 Gbps
- Dual SATA 3.0 ports let you connect two drives
- JMB582 controller supports 6.0 Gbps, 3.0 Gbps and 1.5 Gbps link speeds
- Native command queuing keeps performance stable under heavy load
- Built-in error reporting, recovery and correction protects data integrity
- Partial and sleep power states reduce drive power draw
Compatibility Check
Before ordering, verify that the host device has a free Key A+E M.2 2230 slot with PCI Express signalling. The adapter will not fit Key M, Key B or Key E-only slots. Confirm the system BIOS can boot from an add-in SATA controller if the drives are intended as primary storage. No external power connector is present, so the slot must supply sufficient current for the controller and both attached drives.
Build Integration
The card adds two SATA 3.0 ports to platforms that lack native SATA headers, freeing existing ports for other devices. It accepts standard 2.5-inch SSDs or hard drives using ordinary SATA data and power cables. The JMB582 controller handles the PCI Express to SATA translation without driver installation on most modern operating systems. Mechanical height follows the 2230 form factor, so clearance above the motherboard is minimal.
Highlights
- Dual SATA 3.0 ports let you connect two drives
- JMB582 controller supports 6.0 Gbps, 3.0 Gbps and 1.5 Gbps link speeds
- Native command queuing keeps performance stable under heavy load
- Built-in error reporting, recovery and correction protects data integrity
- Partial and sleep power states reduce drive power draw
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
Does the LORDWORLD NGFF Key A+E adapter include SATA cables or do I need to buy them separately?
The adapter provides two SATA 3.0 ports; SATA data and power cables are not included and must be purchased separately.
Which M.2 keying does the JMB582 2230 card require from my motherboard slot?
It fits an M.2 2230 slot wired for Key A or Key E; confirm your board exposes PCIe lanes on that slot before buying.
What real-world throughput can I expect from the two SATA 3.0 ports on the JMB582 controller?
Each port supports up to 6.0 Gbps, with backward compatibility to 3.0 Gbps and 1.5 Gbps; actual speed depends on the connected SSD and PCIe lane allocation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



