We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Nema SS2-50P plug to 14-50R socket on yellow 1.5FT cable

LORDWORLD

LORDWORLD Nema SS2-50P to 14-50R Adapter 1.5FT

SKU CH-NT1Y-2YEDD

Connects a marine shore power inlet to a dryer-style outlet using a heavy-duty 1.5-foot cable rated for 50 amps at 125/250 volts

  • Connect marine shore power to dryer outlets
  • 50A 125/250V rating supports high-power equipment
  • 6AWG STW cable with ground wire handles heavy loads
  • 5ft length keeps connections tidy
  • Yellow cord with black ends aids quick identification

Marine-to-dryer power adapter

This adapter connects a NEMA SS2-50P marine shore inlet to a NEMA 14-50R dryer receptacle. It is intended for boat owners who need to draw 50 A 125/250 V shore power through a standard dryer outlet. The 1.5 ft length keeps the connection compact on deck or at the dock.

Heavy-duty STW cable construction

The cord uses STW 6 AWG three-conductor wiring with an 8 AWG drain wire for grounding. This gauge supports the rated 50 A continuous current without excessive voltage drop. The yellow jacket resists oil, sunlight and moisture in marine environments.

Short reach for tight installations

At 45 cm the adapter suits close-quarters hookups where a long pigtail would coil in water or traffic. It requires a matching SS2-50P inlet on the vessel and a 14-50R source on shore. Builds needing longer runs or different receptacle types will need a separate cordset.

Highlights

  • Connect marine shore power to dryer outlets
  • 50A 125/250V rating supports high-power equipment
  • 6AWG STW cable with ground wire handles heavy loads
  • 5ft length keeps connections tidy
  • Yellow cord with black ends aids quick identification

Specifications

BrandLORDWORLD

Questions about this item

How do I connect the SS2-50P male plug to my boat's shore power inlet without bending the 6 AWG cable?

Align the keyed blades with the inlet slots, push straight in until the locking ring clicks, then secure the ring by hand; the 1.5 ft length leaves little slack so position the boat before tightening.

What part of this adapter will wear out first and need replacement?

The locking ring threads and the blade contacts on the SS2-50P plug see the most mating cycles; inspect for corrosion or looseness after each season and replace the adapter if the ring no longer holds firmly.

At what load does the 6 AWG STW cable hit its temperature limit during continuous use?

The cable is rated for 50 A at 125/250 V; sustained operation at the full 50 A will bring the conductors to their maximum rated temperature first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.