We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Angled industrial plug, black nylon housing, brass pins, 1.06in max cable OD

LORDWORLD

LORDWORLD NEMA 7-30P 30A 227V Angle Plug 1.06in Max OD

SKU CH-ERV9-HB5ZR

A 30A 227V NEMA 7-30P angle plug with nylon UL 94-V0 housing and brass terminals for 12AWG to 6AWG cable up to 1.06in OD

  • Rated 30 A at 227 V for heavy-duty welder and dryer circuits
  • UL 94-V0 nylon housing insulates live parts and meets RoHS/REACH
  • Brass terminals accept 12 AWG to 6 AWG copper wire for secure connections
  • Two strain-relief options cover cable OD up to 1.06 in
  • Angle plug design eases routing in tight industrial panels

NEMA 7-30P 30 A Angle Plug

This NEMA 7-30P plug delivers a 30 A, 227 V AC connection for welders, dryers and similar heavy-duty equipment. The angled straight-blade body is built from UL 94-V0 nylon that shields live metal parts on the hand-held side. Brass terminals accept solid or stranded copper conductors from 12 AWG down to 6 AWG. An internal dust cover keeps the terminal area free of contaminants during installation and use.

Rewirable Industrial Power Connector

The plug replaces a fixed moulded cord end, letting you repair or build custom leads for industrial and commercial gear. Two PVC strain-relief inserts are supplied: combine both for 12 AWG cord, use the larger alone for 10 AWG, and rely on the metal clamp for thicker cables. Brass blades and contacts resist heat rise and maintain low-resistance conductivity under continuous load.

1.06 in Maximum Cable OD

The housing accommodates round cables up to 1.06 in outer diameter, covering SJT, STO, SO and similar jacket types with three conductors. Conductors larger than 6 AWG exceed the terminal capacity, so the plug cannot be used for higher-current feeders. The nylon shell meets ROHS and REACH substance restrictions for regulated environments.

Highlights

  • Rated 30 A at 227 V for heavy-duty welder and dryer circuits
  • UL 94-V0 nylon housing insulates live parts and meets RoHS/REACH
  • Brass terminals accept 12 AWG to 6 AWG copper wire for secure connections
  • Two strain-relief options cover cable OD up to 1.06 in
  • Angle plug design eases routing in tight industrial panels

Specifications

BrandLORDWORLD

Questions about this item

What is the maximum cable outer diameter this NEMA 7-30P angle plug can accommodate?

The plug supports a maximum cable outer diameter of 1.06 inches, suitable for SJT, STO, SO and similar cord types.

Which strain-relief insert should be used when wiring a 10 AWG cord into this plug?

Use only the 10 AWG strain-relief insert; the 12 AWG insert is not needed for 10 AWG conductors.

How often should the brass terminals be inspected after installation on a welder circuit?

Inspect the brass terminals periodically for heat discolouration or looseness, especially after heavy welding cycles, and re-torque if any movement is found.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.