We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White industrial-grade NEMA 6-15/6-20R female socket with three-prong straight-blade connector

LORDWORLD

LORDWORLD NEMA 6-15/6-20R Female Socket 15/20A 250V White

SKU CH-P2BX-3H68Y

ETL-listed 2-in-1 NEMA 6-15R/6-20R female socket handles 15 A and 20 A at 250 V for industrial rewiring

  • ETL certified for safe 15 A and 20 A 250 V use
  • Combines NEMA 6-15R and 6-20R in one connector
  • Nylon housing shields live parts on the hand-held side
  • Metal blades and contacts resist heat rise for reliable conductivity
  • Internal dust shield keeps terminals free of contaminants

Right-Angle 2-in-1 Female Connector

The LORDWORLD NEMA 6-15/6-20R socket accepts both 15-amp and 20-amp 250-volt plugs in a single white housing. It is built for industrial and commercial wiring tasks where a straight-blade grounding receptacle is required. The ETL-listed device meets UL 498 and CSA C22.2 No. 42 standards for 2-pole, 3-wire grounding applications.

Industrial-Grade Thermal and Electrical Design

Nylon housing insulates the hand-held side while metal blades and contacts resist heat rise during continuous 15-amp or 20-amp loads at 60 Hz. An internal dust shield keeps terminals free of contaminants that could increase resistance. The heavy-duty plastic casing and conducting materials are selected for stable performance in demanding environments.

Rewireable Cord-End Mounting

The right-angle body simplifies cable routing in tight enclosures or along conduit runs. Terminals accept standard straight-blade conductors for field installation without special tools. The combination 6-15R/6-20R slot pattern means one connector covers both common North American 250-volt configurations, reducing inventory for maintenance crews.

Highlights

  • ETL certified for safe 15 A and 20 A 250 V use
  • Combines NEMA 6-15R and 6-20R in one connector
  • Nylon housing shields live parts on the hand-held side
  • Metal blades and contacts resist heat rise for reliable conductivity
  • Internal dust shield keeps terminals free of contaminants

Specifications

BrandLORDWORLD

Questions about this item

How do I wire the NEMA 6-15/6-20R socket and which step is often missed?

Strip each conductor to the correct length, insert hot wires into the brass terminals, neutral into silver and ground into green, then tighten every screw firmly — the step most people skip is verifying no stray strands bridge adjacent terminals before snapping the housing shut.

What part of this 15/20 A 250 V connector will need replacement first?

The internal metal blades and contacts are rated for heavy-duty cycles, but the nylon housing and internal dust shield can become brittle or cracked after years of heat and insertion stress, so the whole rewireable unit is typically replaced rather than individual pieces.

At what load does the 20 A 250 V rating become the limiting factor during continuous use?

The connector is ETL listed to UL 498 and CSA C22.2 No. 42 for 20 A at 250 V AC 60 Hz; sustained loads above 20 A will cause the metal contacts to heat faster than the housing can dissipate it, making the 20 A rating the first thermal limit reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.