We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow STW 10AWG cord with black 5-15P plug and 6-50R socket, 32CM long

LORDWORLD

LORDWORLD NEMA 5-15P to 6-50R Adapter Cord 10AWG 1ft

SKU CH-ZZAA-YT3P8

Connects a 15A household plug to a 50A welder outlet using 10AWG STW cable in a 32cm length

  • Connects standard 15A household outlet to 50A welder receptacle
  • 10AWG STW cable handles heavy-duty power demands safely
  • 1-foot length keeps workspace tidy and reduces clutter
  • 125V plug rated for 250V welder-side compatibility
  • Yellow cord with black ends for clear visual identification

Plug conversion for welder sockets

This adapter connects a standard 15A 125V household plug to a 50A 125/250V welder socket, letting equipment with a NEMA 6-50R inlet draw power from a common wall outlet. The cord uses 10AWG STW conductors rated for heavy-duty use. It is built for indoor or outdoor jobs where a welder-style receptacle is the only connection available.

One-foot reach and visible cable

The yellow STW jacket makes the cord easy to see on a workshop floor, while the black plug and socket ends keep the connection points distinct. At 32CM the cable adds minimal clutter and reduces trip hazards compared with longer leads. No extra software, drivers or accessories are included in the package.

15-amp supply limit

Although the female side accepts a 50-amp plug, the male side is fused by the 15-amp household circuit, so the adapter cannot deliver more than 15 amps at 125 volts. Buyers who need full 50-amp 250-volt output must install a dedicated 50-amp branch circuit instead.

Highlights

  • Connects standard 15A household outlet to 50A welder receptacle
  • 10AWG STW cable handles heavy-duty power demands safely
  • 1-foot length keeps workspace tidy and reduces clutter
  • 125V plug rated for 250V welder-side compatibility
  • Yellow cord with black ends for clear visual identification

Specifications

BrandLORDWORLD

Questions about this item

How often should the 10AWG STW cord and NEMA connectors be inspected for wear?

Inspect the 10AWG STW cord and both NEMA connectors before each use; replace the adapter if the yellow jacket shows cuts, the blades are bent, or the socket grips feel loose.

What limits continuous use on a 15A household circuit?

The 5-15P plug and 15A 125V rating cap continuous draw at 15A; the 6-50R side is rated for 50A but cannot supply more than the circuit allows.

Does the adapter get warm when a welder runs all day on a 15A circuit?

The 10AWG conductors handle the 15A load with minimal temperature rise; the plug may feel warm but should not become hot during extended operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.