We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black right-angle NEMA 5-15P plugs with rotatable housings and brass prongs

LORDWORLD

LORDWORLD NEMA 5-15P Right Angle Plug 360° Rotatable 2-Pack

SKU CH-3BVS-V4YAR

A 360° rotatable right-angle NEMA 5-15P plug rated 15A 125V with ETL certification, fire-resistant nylon housing and brass blades for 12-18AWG cord repair

  • Eliminates cord kinking with 360° rotatable 90° angle and 12 installation directions
  • ETL certified to UL498 standard at 15A 125V with grounded 3-prong design
  • UL94-V0 fire-resistant nylon housing plus solid brass blades for low resistance
  • Rewireable screw terminals accept 12-18AWG SJT/SVT/STO/SJTW cords without special tools
  • Compact right-angle profile fits tight spaces behind furniture appliances and workshop tools

Right-Angle NEMA 5-15P Plug 2-Pack

This two-pack supplies 360° rotatable right-angle plugs rated 15A 125V for North American mains. The 90° body accepts 12 to 18AWG three-conductor SJT, SVT or STO cord and is built for DIY rewiring of appliance leads and extension cords. ETL listing to UL498 confirms compliance for household and light industrial use.

Thermals Noise Power Draw

UL94-V0 fire-resistant nylon housing and solid brass blades keep resistance low during continuous rated operation. The screw-terminal split housing allows secure conductor clamping without specialised tools, reducing hot-spot risk at the connection. No active cooling or moving parts are present, so the plug adds no audible noise to the circuit.

Sustained Load Behaviour

The rotatable design locks into 12 angular positions, preventing cord fatigue when the cable is dressed tight against walls or behind equipment. Brass prongs maintain stable contact through repeated thermal cycles at the full 15A rating. The compact profile stays seated in recessed outlets where straight plugs would lever loose over time.

Highlights

  • Eliminates cord kinking with 360° rotatable 90° angle and 12 installation directions
  • ETL certified to UL498 standard at 15A 125V with grounded 3-prong design
  • UL94-V0 fire-resistant nylon housing plus solid brass blades for low resistance
  • Rewireable screw terminals accept 12-18AWG SJT/SVT/STO/SJTW cords without special tools
  • Compact right-angle profile fits tight spaces behind furniture appliances and workshop tools

Specifications

BrandLORDWORLD

Questions about this item

How do I wire the LORDWORLD NEMA 5-15P plug and which step causes the most mistakes?

Loosen the three marked terminal screws, insert stripped 12~18AWG conductors into the correct slots — green to ground, white to silver, black to brass — then tighten each screw firmly. The step most often done wrong is reversing the hot and neutral wires; always match the terminal colour codes before tightening.

What maintenance or replacement will this plug need over time?

The plug itself is maintenance-free, but inspect the screw terminals periodically for loosening caused by vibration or thermal cycling. If the cord jacket cracks or the brass blades show pitting or discoloration, cut back the cord and re-terminate or replace the plug.

What is the first limit reached when the plug runs at full load for long periods?

The 15A 125V rating is the primary limit; sustained current above 15 amps will cause the brass blades and terminals to heat beyond the UL94-V0 housing's safe operating temperature, so the circuit breaker must trip at or below 15A.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.