We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow heavy-duty cable with black 4-prong male and 3-prong female plugs, 32 cm long

LORDWORLD

LORDWORLD NEMA 14-50P to 10-50R Adapter Cable 1 Foot STW 6AWG 50A 125/250V

SKU CH-SQ88-5HABJ

A 1 foot adapter cable connects a NEMA 14-50P four-prong male plug to a NEMA 10-50R three-prong female socket at 50 A, 125/250 V using STW 6 AWG conductors

  • Connects 4-prong dryer plugs to 3-prong outlets
  • Rated for 50A at 125/250V for high-power appliances
  • Heavy-duty STW 6AWG cable handles demanding loads
  • Compact 1-foot length keeps setup tidy
  • Yellow PVC jacket resists wear in tough conditions

1-foot NEMA 14-50P to 10-50R adapter

This new LORDWORLD adapter cable connects a NEMA 14-50P four-prong male plug to a NEMA 10-50R three-prong female receptacle. It is built for users who need to mate a modern dryer-style outlet with an older three-prong equipment cord. The cord measures one foot, approximately 32 centimetres, and features a yellow STW jacket with black connectors.

50-amp 125/250-volt rating on 6 AWG conductors

The cable uses STW 6 AWG three-conductor PVC construction rated for 50 amps at 125/250 volts. This ampacity and gauge combination is the single specification that determines whether the adapter can safely handle the intended load. The four-prong male side provides separate neutral and ground contacts, while the three-prong female side combines them.

Suits owners of 10-50R equipment plugging into

This adapter suits anyone connecting a legacy three-prong 50-amp appliance or EV charger to a newer four-prong 14-50 receptacle. It does not suit installations that require a dedicated ground path back to the panel, nor situations where local code forbids adapting a four-prong supply to a three-prong load. Buyers needing a longer reach or a different connector configuration should look elsewhere.

Highlights

  • Connects 4-prong dryer plugs to 3-prong outlets
  • Rated for 50A at 125/250V for high-power appliances
  • Heavy-duty STW 6AWG cable handles demanding loads
  • Compact 1-foot length keeps setup tidy
  • Yellow PVC jacket resists wear in tough conditions

Specifications

BrandLORDWORLD

Questions about this item

How does the 50 A 125/250 V rating translate when the adapter is powering a dryer?

The adapter carries the full 50 amp rating at both 125 V and 250 V, so the dryer receives the same current capacity as a direct NEMA 14-50 connection.

What does the NEMA 14-50P to 10-50R interface actually limit in daily use?

The 4-prong male supplies two hots, neutral and ground while the 3-prong female provides two hots and neutral only; the dryer chassis ground must be bonded separately.

What clearance is needed for the 1-foot STW 6 AWG cable behind the appliance?

The cord is about 32 cm long with a heavy 6 AWG jacket, so allow enough depth for the plugs and a gentle bend radius.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.