LORDWORLD
LORDWORLD NEMA 14-50P 50A 125V 250V Plug with Handle
ETL-certified 50 A NEMA 14-50P male plug with PowerGrip handle fits .9 in cord for RV, EV and dryer use
- ETL-certified for safe 50A 125V/250V connections
- PowerGrip handle enables quick, secure assembly
- Strain relief fits 22.8mm cable diameter
- Compatible with multiple heavy-duty cord types
- Single 14-50P male plug ready to install
Replacement Plug for RV and EV Use
This LORDWORLD NEMA 14-50P male plug replaces a worn or damaged connector on 50-amp service cords. It suits recreational vehicles, electric-vehicle charging cables and camper trailers that rely on a four-prong 125/250-volt supply. The ETL certification confirms compliance with recognised North American safety standards.
Strain Relief and Handle Design
The strain relief accepts a cable outer diameter of 22.8 mm and is rated for 6 AWG three-conductor plus 8 AWG single-conductor constructions. It also complies with SO, ST, STO, STOO, SOW, SOOW, STW, STOW and STOOW cord types in 10 AWG three-conductor sizes. An integrated PowerGrip handle simplifies insertion and removal while reducing strain on the terminals during daily connect and disconnect cycles.
Thermals and Power Handling
Rated at 50 amperes across 125 and 250 volts, the plug handles continuous high-current loads typical of dryer, RV shore-power and EV charging circuits without overheating. The robust terminal construction and secure cable clamp maintain low contact resistance, keeping temperature rise minimal during extended charging sessions. No active cooling is required and operation remains silent under normal use.
Highlights
- ETL-certified for safe 50A 125V/250V connections
- PowerGrip handle enables quick, secure assembly
- Strain relief fits 22.8mm cable diameter
- Compatible with multiple heavy-duty cord types
- Single 14-50P male plug ready to install
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What amperage and voltage does the NEMA 14-50P plug handle?
The plug is rated for 50 amps at 125V and 250V, matching the NEMA 14-50P standard for high-power RV, EV and dryer connections.
What cable sizes fit the 22.8 mm strain relief?
The strain relief accepts 6 AWG three-conductor plus 8 AWG one-conductor cable, or 10 AWG three-conductor SO/ST/STO/STOO/SOW/SOOW/STW/STOW/STOOW cord.
How do you attach the plug to the cord?
Strip the conductors, insert them into the screw terminals, tighten each screw securely, then clamp the strain relief around the cable jacket to prevent pull-out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



