We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon angled plug with three brass blades and strain relief

LORDWORLD

LORDWORLD NEMA 14-50P 50A 125/250V Angle Plug 1.06in OD

SKU CH-9NW3-68HD8

Rewireable 50 A 125/250 V angle plug accepts cords up to 1.06 in OD and 6 AWG conductors

  • Rewireable 50 A 125/250 V plug for dryer and range connections
  • UL 94-V0 nylon shell resists heat and meets ROHS REACH standards
  • Brass terminals accept 12 to 6 AWG copper wire for secure installation
  • Accepts cable up to 1.06 in OD with two strain-relief options included
  • Insulated housing and internal dust shield protect contacts in industrial use

NEMA 14-50P Angle Plug for Dryers and Ranges

This NEMA 14-50P angle plug is a rewireable AC power connector rated at 50 amps and 125/250 volts. It suits DIY installations on dryers, ranges and similar heavy-duty appliances. The straight-blade, three-pole, three-wire grounding design meets industrial and commercial wiring requirements.

Thermals, Noise and Power Draw

The nylon housing carries a UL 94-V0 flammability rating and complies with ROHS and REACH. Brass terminals and pure copper pins resist heat rise while maintaining conductivity. An internal dust shield keeps terminals free of contaminants during normal operation. No active cooling or moving parts are present.

Strain Relief Options and Cable Compatibility

Two optional strain-relief inserts are supplied: the 12 AWG insert pairs with the 10 AWG insert for 12 AWG cords, while the 10 AWG insert works alone for 10 AWG cords. Larger cables up to 1.06 inches OD use the metal pressure clamp only. Supported cord types include SJT, STJW, STO, SJTO, SO, ST, SRD and SVO with three conductors from 12 AWG to 6 AWG.

Highlights

  • Rewireable 50 A 125/250 V plug for dryer and range connections
  • UL 94-V0 nylon shell resists heat and meets ROHS REACH standards
  • Brass terminals accept 12 to 6 AWG copper wire for secure installation
  • Accepts cable up to 1.06 in OD with two strain-relief options included
  • Insulated housing and internal dust shield protect contacts in industrial use

Specifications

BrandLORDWORLD

Questions about this item

How do I install the LORDWORLD NEMA 14-50P angle plug and which strain relief do I use for 10 AWG cord?

Strip wires, insert into brass terminals, tighten screws; for 10 AWG cord use only the 10 AWG strain relief, for 12 AWG use both 12 AWG and 10 AWG reliefs together, for larger cables use the metal pressure plate only.

What maintenance or replacement will the LORDWORLD NEMA 14-50P angle plug need over time?

Inspect the nylon shell for cracks or discolouration, check brass terminals for oxidation or loose screws, and verify the PVC strain reliefs remain intact; replace the plug if any heat damage or worn contacts appear.

What is the first limit that appears when the LORDWORLD NEMA 14-50P angle plug runs at 50 A continuously?

The 50 A rating is the hard limit; sustained 50 A load will cause the brass terminals and nylon housing to reach their maximum safe temperature before any other constraint appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.