We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connector and mounting holes

LORDWORLD

LORDWORLD mSATA to 2.5" SATA Enclosure Adapter

SKU CH-YPKH-9T39E

Converts a 50×30 mm mSATA SSD into a 2.5" SATA drive with 6.0 Gbps transfer speeds

  • Fits 50×30 mm mSATA SSDs for system-disk upgrades
  • SATA 6.0 Gbps link keeps data moving at full drive speed
  • Works with Windows XP through 11, Linux and Mac without extra drivers
  • Standard 22-pin SATA power and data connector drops into any 2.5″ bay
  • Not for mini PCIe SATA or M.2 NGFF drives — avoids wrong-slot damage

mSATA SSD Adapter

This adapter converts a 50mm by 30mm mSATA solid-state drive into a standard 2.5 inch SATA form factor. It enables the drive to function as a system disk inside desktops or external enclosures with a SATA connection.

Capacity and Speed Limits

The board supports SATA transfer rates of 6.0Gbps, 3.0Gbps and 1.5Gbps, matching the drive's native capability. It does not add performance beyond the mSATA device itself and cannot accommodate M.2 NGFF or mini PCIe SATA SSDs.

Upgrade Path and Compatibility

It replaces a direct motherboard mSATA slot when that slot is absent or occupied, letting older drives serve in newer 2.5 inch bays. The jump is worthwhile only if you already own a compatible mSATA SSD and need SATA connectivity.

Highlights

  • Fits 50×30 mm mSATA SSDs for system-disk upgrades
  • SATA 6.0 Gbps link keeps data moving at full drive speed
  • Works with Windows XP through 11, Linux and Mac without extra drivers
  • Standard 22-pin SATA power and data connector drops into any 2.5″ bay
  • Not for mini PCIe SATA or M.2 NGFF drives — avoids wrong-slot damage

Specifications

BrandLORDWORLD

Questions about this item

Will the LORDWORLD mSATA adapter let me use a 50×30 mm mSATA SSD as a system drive alongside my older 2.5" SATA hard drives?

Yes, the adapter converts a 50×30 mm mSATA SSD to a standard 2.5" SATA form factor so it can serve as a system disk alongside existing SATA drives.

How can I confirm the adapter is running at the 6.0 Gbps rate after installation?

Check the negotiated link speed in your OS disk utility or BIOS; it will show 6.0 Gbps when the host controller and SSD both support SATA III.

Does the package include mounting screws or a SATA data cable, or must I buy them separately?

The adapter board itself is supplied; mounting screws and a SATA data cable are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.