We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with 68-pin mSATA slot and 22-pin SATA connector

LORDWORLD

LORDWORLD mSATA to 2.5" SATA Adapter 68pin

SKU CH-GKZC-HCVR8

Converts any mSATA SSD to a 2.5 inch SATA drive while keeping 6Gbps speed

  • Use any mSATA SSD in a standard 2.5" SATA bay
  • Maintains full 6Gbps SATA 3.0 throughput after conversion
  • Compact 71 x 53 x 5.0 mm PCBA fits tight enclosures
  • 68-pin mSATA to 22-pin SATA interface for direct compatibility
  • Supports boot drive installation in SATA hard-disk cases

Product identity

The LORDWORLD adapter converts an mSATA SSD to a standard 2.5 inch SATA form factor using a 68 pin interface. It supports SATA 3.0 operation at 6Gbps without reducing the drive’s native throughput. The PCBA measures 71 by 53 by 5.0 mm and fits typical 2.5 inch drive bays.

Compatibility scope

The board works only with mSATA connectors and cannot accept 50 mm Mini PCI-e or Mini PCI-e PATA modules. Builders needing to install a different interface or a longer card should look at other solutions.

Capacity and headroom

Any mSATA SSD connected through this adapter retains full SATA 3.0 bandwidth for boot and storage tasks. The adapter adds no extra controller, so performance scales directly with the installed drive’s own limits.

Highlights

  • Use any mSATA SSD in a standard 2.5" SATA bay
  • Maintains full 6Gbps SATA 3.0 throughput after conversion
  • Compact 71 x 53 x 5.0 mm PCBA fits tight enclosures
  • 68-pin mSATA to 22-pin SATA interface for direct compatibility
  • Supports boot drive installation in SATA hard-disk cases

Specifications

BrandLORDWORLD

Questions about this item

What size mSATA SSD do I need to already own for this 68pin adapter to work?

Any mSATA mini PCI-e SSD with the standard 68pin connector will fit; the adapter is not compatible with 50mm Mini PCI-e or Mini PCI-e PATA modules.

Will my existing SATA 3.0 host controller run at full 6Gbps speed with this adapter installed?

The adapter does not change the 6Gbps speed, so a SATA 3.0 host will still operate at 6Gbps with the mSATA SSD.

How can I confirm the adapter is functioning correctly after I fit it into a 2.5 inch drive bay?

The system BIOS should detect the mSATA SSD at SATA 3.0 6Gbps and the operating system will recognise it as a bootable SATA drive.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.