We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8643 plug splitting to four SFF-8482 connectors with SATA power leads, braided 1 m cable

LORDWORLD

LORDWORLD Mini SAS SFF-8643 to 4× SFF-8482 SAS Cable 1 m SATA Power

SKU CH-VDE7-H20XB

A 1 m SFF-8643 to four SFF-8482 breakout cable with integrated SATA power adapters, supporting 6 Gb/s per drive for connecting a controller to four drives

  • Connects HBA to four drives via SFF-8643 to SFF-8482 breakout
  • Each breakout includes SATA 7-pin data plus 15-pin power adapter
  • Supports 6 Gb/s per drive for SAS and SATA disks
  • Braided 1 m cable with labelled ends eases routing and management
  • Requires external SATA power cables attached to each adapter

SFF-8643 breakout cable with SATA power

This LORDWORLD cable splits a single internal Mini SAS HD SFF-8643 port into four SFF-8482 connectors. Each branch combines a 7-pin SATA data interface with a 15-pin SATA power adapter. It connects a SAS HBA or PCIe RAID controller to up to four SAS or SATA hard drives. The 1 m length suits typical chassis routing.

6 Gb/s per drive limit and controller requirement

Data transfer tops out at 6 Gb/s per attached drive. The SFF-8643 end must plug into a host controller or motherboard port; connecting it to a backplane will not work. Each SFF-8482 adapter requires a separate SATA power cable from the power supply to deliver power to the drive.

Replaces bare breakout cables lacking integrated

This assembly replaces a plain SFF-8643-to-4×SFF-8482 breakout that would need separate power wiring. The integrated 15-pin adapters cut installation steps when adding drives to a controller. The jump is worthwhile when you want labelled, braided cables that simplify routing in a DIY or professional build.

Highlights

  • Connects HBA to four drives via SFF-8643 to SFF-8482 breakout
  • Each breakout includes SATA 7-pin data plus 15-pin power adapter
  • Supports 6 Gb/s per drive for SAS and SATA disks
  • Braided 1 m cable with labelled ends eases routing and management
  • Requires external SATA power cables attached to each adapter

Specifications

BrandLORDWORLD

Questions about this item

Should I choose the .5 m or 1 m cable for my build?

Pick the 1 m cable if the controller is farther from the drive cage; choose the .5 m cable for tighter chassis routing and less slack.

What does the 6 Gb/s per drive figure mean once the cable is installed?

Each of the four SFF-8482 branches can carry up to 6 Gb/s to a SATA or SAS drive, so the cable does not limit the speed of 6 Gb/s drives.

How does the SFF-8643 interface cap performance in practice?

The SFF-8643 Mini SAS HD connector supports 6 Gb/s per lane, matching the 6 Gb/s per drive rating of the four SFF-8482 breakout ends.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.