LORDWORLD
LORDWORLD Mini SAS SFF-8087 to 4× SFF-8482 SAS + SATA Power Cable 100cm
Connects a Mini SAS SFF-8087 controller to four SFF-8482 SAS drives with integrated SATA 15-pin power over 100 cm
- Connect four SAS drives from one 36-pin mini SAS port
- Power each drive directly with integrated SATA 15-pin connector
- 100 cm length fits full-tower and rack builds
- SFF-8087 host to SFF-8482 target for native SAS signalling
- Fan-out design simplifies RAID and JBOD cabling
Mini SAS fanout cable for RAID arrays
This cable connects a single Mini SAS SFF-8087 host port to four individual SAS SFF-8482 drives. It is intended for system builders wiring internal RAID controllers or HBAs to multiple hard disks in servers or workstations. The 100cm length provides reach across full-tower chassis. It suits anyone expanding direct-attached storage without a backplane.
36-pin host with integrated SATA power
The host end uses a 36-pin SFF-8087 connector while each target leg ends in an SFF-8482 interface for SAS drives. A 15-pin SATA power connector is moulded into the assembly so drives receive power from the same cable run. This reduces internal clutter and removes the need for separate power splitters when the PSU has spare SATA leads.
Four-drive limit per cable
One cable supports exactly four SAS targets, so arrays larger than four drives require additional cables or a backplane. Buyers needing more than four connections from a single Mini SAS port cannot use this product alone.
Highlights
- Connect four SAS drives from one 36-pin mini SAS port
- Power each drive directly with integrated SATA 15-pin connector
- 100 cm length fits full-tower and rack builds
- SFF-8087 host to SFF-8482 target for native SAS signalling
- Fan-out design simplifies RAID and JBOD cabling
Specifications
| Brand | LORDWORLD |
|---|
Questions about this item
What does the SFF-8087 host connector support on this cable?
The SFF-8087 host connector links a controller with a 36-pin mini SAS port to four SFF-8482 SAS hard drives.
What physical clearance does the SATA 15-pin power connector require?
The SATA 15-pin power connector needs a standard drive power socket and enough cable routing space for the 100cm length.
How is the fan-out cable installed, and which step is often missed?
Connect the SFF-8087 end to the controller, attach each SFF-8482 plug to a drive, then plug the SATA 15-pin power lead into the PSU — forgetting the power lead is the common error.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
