We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A short cable with a wide rectangular connector splitting into four L-shaped SATA plugs

LORDWORLD

LORDWORLD Mini SAS HD SFF-8643 to 4 SATA 7pin Cable .5m

SKU CH-BCXR-G7NSD

Connects four SATA drives to a Mini SAS HD SFF-8643 controller at up to 6 Gb/s over a .5 m internal cable

  • Connect four SATA drives with one Mini SAS HD SFF-8643 port
  • 6 Gb/s SAS bandwidth supports fast RAID arrays
  • Half-metre length fits compact server chassis
  • HD Mini-SAS connectors ready for SAS 3.0 at 12 Gb/s
  • Straightforward internal cabling for storage upgrades

Internal RAID cable for four SATA drives

This new LORDWORLD cable connects a Mini SAS HD SFF-8643 host port to four SATA 7-pin drives. It is built for internal server and RAID configurations that use the SAS 2.1 high-density connector system. Data transfer reaches 6 Gb/s per lane over the 0.5 m copper assembly.

Suits RAID builders with an SFF-8643 controller

Builders who need to attach four SATA hard disks or SSDs to a single Mini SAS HD SFF-8643 port will find this cable fits the task. It is not for systems that require an external Mini SAS connector, a different SFF pin-out, or a longer internal run than 0.5 m.

The SFF-8643 host connector decides fit

The single Mini SAS HD SFF-8643 plug on the host side is the specification that determines whether this cable matches your controller. Verify that your RAID card or motherboard presents exactly this high-density port before ordering.

Highlights

  • Connect four SATA drives with one Mini SAS HD SFF-8643 port
  • 6 Gb/s SAS bandwidth supports fast RAID arrays
  • Half-metre length fits compact server chassis
  • HD Mini-SAS connectors ready for SAS 3.0 at 12 Gb/s
  • Straightforward internal cabling for storage upgrades

Specifications

BrandLORDWORLD

Questions about this item

How can I confirm the cable is operating at the full 6 Gb/s SAS rate after connecting four drives?

Check the controller BIOS or OS disk utility; each SATA target should report a 6 Gb/s link speed.

The box shows one SFF-8643 plug and four SATA 7-pin plugs — are drive power cables or brackets included?

Only the data cable is supplied; SATA power leads and any mounting hardware must be sourced separately.

My backplane accepts SFF-8643 — should I choose this .5 m version or a longer one?

The .5 m length suits typical server chassis; select a longer cable only if the controller-to-backplane distance exceeds half a metre.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.