We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LORDWORLD

LORDWORLD MB998V4P-B 8-Bay U.2/U.3 NVMe Adapter 5.25" 4× SlimSAS 8i SFF-8654

SKU CH-VJBR-2MWW5

Holds eight U.2/U.3 NVMe SSDs in a single 5.25" bay with four SlimSAS 8i connectors and dual cooling fans

  • Fits eight U.2/U.3 NVMe SSDs into a single 5.25" bay
  • PCIe 4.0 x4 per drive delivers up to 64Gbps bandwidth
  • Four SlimSAS 8i SFF-8654 connectors link two drives each
  • Dual 40×40×20mm fans with optimized airflow cool all drives
  • Full-metal construction with EMI grounding ensures signal integrity at speed

8-Bay U.2/U.3 NVMe Adapter for 5.25" Bay

This adapter installs eight 7 mm U.2 or U.3 NVMe SSDs into a single external 5.25 inch device bay. Each drive connects through a PCIe 4.0 x4 interface delivering up to 64 Gbps depending on the host. It is built for workstations and servers that need dense, high-speed flash storage without occupying multiple drive slots. The unit requires a tri-mode HBA or RAID controller operating in NVMe mode.

Four SlimSAS 8i Host Connections

Four SlimSAS 8i SFF-8654 connectors link the adapter to the host, with each connector serving two SSDs. This layout keeps cable count low while preserving full PCIe 4.0 bandwidth to every drive during sustained workloads. The backplane is designed for continuous operation in multi-drive arrays where thermal throttling would otherwise reduce throughput. EMI grounding protects signal integrity across all lanes at high data rates.

Full-Metal Chassis with Dual 40×40×20 mm Fans

A full-metal frame acts as a heatsink for all eight SSDs while dual 40×40×20 mm fans push air through the drive bays. Front-mounted LEDs show power and activity status for each drive at a glance. A single PCIe 8-pin connector supplies power to the entire assembly, simplifying cable routing in dense chassis. The metal construction and forced airflow keep drive temperatures stable during extended write-heavy tasks.

Highlights

  • Fits eight U.2/U.3 NVMe SSDs into a single 5.25" bay
  • PCIe 4.0 x4 per drive delivers up to 64Gbps bandwidth
  • Four SlimSAS 8i SFF-8654 connectors link two drives each
  • Dual 40×40×20mm fans with optimized airflow cool all drives
  • Full-metal construction with EMI grounding ensures signal integrity at speed

Specifications

BrandLORDWORLD

Questions about this item

How loud and hot does the dual 40×40×20mm fan setup get when all eight U.2/U.3 NVMe SSDs run continuously?

The dual 40×40×20mm fans use an optimized airflow design across the full-metal chassis to dissipate heat from eight PCIe 4.0 x4 drives; noise level varies with fan speed and case airflow.

Which host connectors and power cable must my system already provide for this 8-bay adapter?

You need four SlimSAS 8i (SFF-8654) host ports on a tri-mode HBA or RAID card running in NVMe mode, plus one PCIe 8-pin power connector from the PSU.

Will my existing PCIe 3.0 tri-mode RAID card work with this MB998V4P-B and its eight NVMe drives?

The adapter is PCIe 4.0 x4 per drive and requires a tri-mode HBA/RAID card in NVMe mode; a PCIe 3.0 card will operate at 3.0 speeds if it supports NVMe passthrough.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.